Question about Sylvania 6432TE 32" TV

1 Answer

32 inch sylvania tv

Tv will turn off by itself displays this message protected program by tv- pg

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert whose answer got voted for 20 times.


    An expert that has over 10 points.

  • Expert
  • 2 Answers
Re: 32 inch sylvania tv

This problem is caused by your TV's V-chip setting.

To fix the problem:

Push the "Menu" button (on either the remote or the TV's fromt panel).
Use the "Channel Down" button to go to "V-CHIP SETUP"
Use the "Volume Up" button to select it.
In the V-chip setup screen, the rating that is selected by the user as viewable will allow that rating and only lower ratings to be viewed on that TV. (If TV-G) is selected, then any programs rated higher than TV-G will be blocked.

So, the easistway to get rid of any blocking is to set the rating to TV-MA (mature), and then any and all programs will be viewable on that set. Select "TV-MA" by hitting the "Volume Up" button after you have scrolled down to that rating with the "Channel Down" button.

Then hit "Menu" to exit out of the settings and saave your changes.

Posted on Jun 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to connect sylvania tv to comcast remote.


Codes to activate Sylvania to comcast universal remote control are:-

Try each code after switching off your TV set by its power switch.

11864, 10054, 10030, 10171, 10020, 10028, 10065, 10096, 11314, 11665, 11963

Turn on the TV
NOTE: Please read steps 2 to 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.
2. Press and hold SETuntil the Red Light blinks twice, then release SET.
3. Locate the code for your device in Manufacturer's Codes on the back of this user guide. Brands are listed in alphabetical order with the most popular codes listed first.
4. Enter the first five-digit code for your TV. If you perform this procedure correctly, the Red Light will blink twice
NOTE: If you enter an invalid code, the red light will display one long blink and exit the programming mode. Repeat steps 2 to 5 with a valid code.
5. Aim the remote control at your TV and press Power once. The device should turn off. If it does not respond, repeat steps 2 to 4, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code.

Dec 11, 2010 | Sylvania SRT2232S 32" TV

3 Answers

I have no control over my TV.

This kind of symptoms appears when System Control IC have cold solder joints. Please check below picture mentioned IC101 to be resold in your TV main board.


If you have good soldering skills and familiar with TV, you can do it at your own.
Good luck.

Sep 29, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

All of a sudden, the majority of the TV stations we could get are now overridden with the message "Protected Program by TV-PG". Help!!!

Somehow your parental lock got turned on. You will have to see if you can find it in the menu and turn it off. You should be able to find the instructions in the owner's manual as to how to do this if you can't figure it out. It will probably ask you for your password. If you do not know your password, the owner's manual will tell you how to reset it. What is the model number of the tv?

Sep 04, 2010 | Emerson Standard (CRT) Televisions

2 Answers

My television is saying protected program by tv-pg. How do i get this off

you gotta go into menu of tv--find parental controll-go thru it-take out ratings that are blocked--you can also go to to unblock just about everything made

Sep 18, 2009 | Symphonic ST419E TV

1 Answer

Screen go black and says "Protected Program by TV - PG"

your tv is on parental lock. contact your dealer for the super password.

Jul 29, 2009 | Standard (CRT) Televisions

1 Answer

The wording "protected program by TV PG" is on my tv and i cannot access any of my tv channels. How do I remove the block?

Access the menu and go to Parental Control. Change the settings to allow the types of programs you want to be unprotected.

Jul 09, 2009 | Standard (CRT) Televisions

1 Answer


walmart sells a ge universal remote in the check out it is a three in one remote. for five bucks. it does everything i own. except a twenty five year old tv. it will even access the menus on my ac unit.

check it out. you may have to use the manual program mode on the thing but it will probaly work

Mar 12, 2009 | Symphonic Standard (CRT) Televisions

1 Answer

Our TV Sylvania blocks some progrfams on ch. 51

Go to the TV setup menu and look for the V-Chip settings. Turn it off altogether or if you have children you may want to just raise the block up to MA, R, or X rated programs

Jan 25, 2009 | Sylvania 6427TE 27" TV

2 Answers

Locked out of tv

Maybe Try Unplugging It? Some T.v's Also Have A Reset On Them. If That Doesn't Help Please List The Specific Make And Model.

Jan 05, 2009 | Zenith H25F36DT 25" TV

Not finding what you are looking for?
Sylvania 6432TE 32" TV Logo

468 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66499 Answers

Kenneth Walker

Level 2 Expert

133 Answers

Brad Brown

Level 3 Expert

13362 Answers

Are you a Sylvania Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides