Question about Saeco Vienna De Luxe Espresso Machine
The coffee residue is the result of the machine relieving its pressure into the drip tray. When it relieves its pressure, a little coffee residue with some water is released also, otherwise you would have an explosion of coffee inside your machine. If you are getting dry coffee in the drip tray you are getting an overcharge and that is not good. If you get residue under the drip tray, you have a blocked drain in the back of the machine just above the center of the drip tray.
Posted on Jul 29, 2009
The above answer is spot on really.
Posted on Dec 24, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 11, 2013 | Keurig B70 Coffee Maker
Jun 18, 2012 | Coffee Makers & Espresso Machines
Nov 11, 2010 | Cuisinart Grind and Brew 10 Cup Coffee...
Mine has been doing the same thing. I alkso received one at Chriustmas and it worked great for a few months. Below is the answer I received from Keurig:
It is possible that the needle that penetrates the K-Cup has become clogged. Please follow these simple steps to clean it:
Turn off the brewer and unplug it.
Reach under the nozzle (where the coffee comes out) and press up on the bottom of the funnel. The K-Cup holder will pop out.
Separate the K-Cup holder into two pieces. The top piece of the K-Cup holder is where the exit needle is located.
Use a paper clip to clear the exit needle by putting the paper clip in the tube on the underside of the holder. Be careful, the exit needle is sharp.
Wash the K-Cup holder with soap and water, rinse thoroughly. Also make sure the drawer is clean.
Put K-Cup holder back into the drawer, making sure it snaps into place.
Plug the brewer in and turn on.
Run two cleansing brews (brew without a K-Cup) through the machine, and then brew a cup of coffee.
If you still find grinds in your coffee, it would be best for you to talk to a representative to help troubleshoot your problem and discuss your options. This could be caused by too much pressure sealed inside the K-Cup or the filter alignment may be off. Please contact our customer service department at 1-866-901-BREW (2739). Representatives are available 7 days a week from 7 a.m. – 12:00 Midnight EST to assist you. Please have the serial number of your brewer available for when you call.
The serial number for the Mini is located on the bottom of the brewer on a silver sticker.
For the Classic, Ultimate and Select, is located on a sticker behind the drip tray.
For the Elite, Ultra, Special Edition and Platinum it may be located either on the bottom of the brewer on a white sticker or, behind the drip tray.
Keurig Customer Service
At Home Division
(866) 901-BREW (2739)
Aug 25, 2010 | Keurig B30 Mini Coffee Maker
Dec 06, 2009 | Saeco Magic Comfort Plus Espresso Machine
Jul 03, 2009 | Saeco V-spresso Espresso Machine
Apr 06, 2009 | Keurig B50 Coffee Maker
Mar 02, 2009 | Solis SCDIG-5000 Coffee Maker, Espresso...
Feb 15, 2009 | Keurig Special Edition B60 Coffee Maker
Feb 05, 2008 | Jura Capresso Impressa E75 Espresso &...
Jul 04, 2014 | Saeco Vienna De Luxe Espresso Machine
250 people viewed this question
Usually answered in minutes!