My PSP has been acting up. The sound no longer works when i take the headphones out and then when I plug in the headphones the sound only comes out of the right side unless i rig it so that it comes out of both. Please help. Thank You.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you are talking about the built in speakers, make sure your volume is turned up. And make sure its turned up when the headphones are not plugged in. My android tablet has individual sound profiles so while I might have the sound muted when the headphones are not plugged in, if I plug them in, the volume jumps to my set level because that's where I turned the volume up to last time the headphones were plugged in. I've also had two tablets that the speakers went out completely on that to is a possibility but if you are talking about the built in speakers, check the volume levels first. You can get to them in the settings menu. Its worth noting that plugging anything into the headphone jack will "turn off" the internal speakers altogether.
If you are talking about external, plug into the jack speakers, on a tablet, you're going to need a set of powered speakers as that jack is not going to produce enough power to drive an un-amplified speaker. Make sure you are using a pair of speaks that plug into the wall such as PC speakers.
Second, if you are using powered speakers and still not getting any where, look at the jack end of your head phones and compare it to the jack end of your speakers. I know iPhones and other Apple devices have an extra connect which is why the Apple head phones all have an extra ring. My older headphones are worthless in my iPhone because they lack said extra connection. It's possible your tablet also requires the newer connection and the headphones have that while your speakers don't.
Broad answers, but I couldn't tell exactly what we were looking at based on the questions. Hope it helps, and good luck!
If the head phone jack works its more likely to be the problem, if you use the headphone jack a lot the connections inside it can get worn or bent out of shape--engaging the headphone jack should shut the speakers in the unit off.
Other possible reason is a bad speaker or connections.
The Laptop has 3 Ports on the side- Pink,Green,Black Pink Port is LineIn for an external device player jack
Green Port is LineIn for the Microphone jack Black Port is LineOut for Headset or External Speakers jack
Plug the Green jack on Headphone - into the Black Port on the laptop. b) Go to Control Panel and open - RealTek HD Audio manager On the top of Page are 3 Icons -
One Icon is labelled Speakers One is for Digital optics, one is for Mic, The Speakers Icon is misleading as it is also for Headphones (LineOut)
Select Speaker Icon and make it Default. Also tick Full Range - Front LR Ignore the 4 vertical Analog Icons on the right side.
You should now have Headphone sound if your volume is not Muted.
click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click select enablewindows 7
click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click selectconfigure speech recognition then you will see earphones with a speaker among a list set up a microphone headset with microphonethen next and next againyou should see your earphones with microphone being configured click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list make sure you have the right one selected and in the volume box make sure the microphone box has a tick in it or select the voice tab make sure that you have the right media selected also select volume make sure the box for microphone has a tick in it
or you might have to depending on your operating system Click start Control Pannel click on Hardware and Sound
click on Sound then you devices should come up ; speakers, Digital Audio, and headphones
plug your headphones in then select headphones
at the bottom it will say set as default select that!!
then when you disconnect your headphones it automatically switches to the speakers and when you plug them back in it automatically will switch to headphones
Usually if a jack doesn't work, it's because it isn't plugged into the motherboard correctly, or you have it muted in Windows. Check both things, and if it still isn't working, then possibly you have a bad jack, or bad plug onto the motherboard.
Here is the manual, in case you didn't have yours.
i dont think anything will show on your computer unless you are using an internet messenger program yahoo or skype or something similiar you will have to do this manually click start control panel
sounds and audio devices select advanced there might be a tick in the mute box
untick it or select audio from the microphone drop down list make sure you
have the right one selected and in the volume box make sure the microphone box
has a tick in it or select the voice tab and make sure that you have the right
media selected also select volume make sure the box for microphone has a tick
in ithope this helps
Go to control panel, click on sound and check if the head phone jack is enabled and also if the drop down list under head phone jack properties states 'use this device' I had a similar problem with my build in speakers on my laptop also in Vista and the problem was simply that the speakers were not enabled. Hope that solves the problem for you.
You must set the sound output on your computer either through the motherboard sound controller or through the windows control panel.In each of these sections will be a speaker set-up control allowing you set up the type of sound you want to come out of your computer. Headphones only, speakers only, Headphones and speakers. Hope this helps you with your problem.
The front audio in this case does not support HD sound. To get it to work you must instal the "HD Sound Application" that came with your hardware and disable the "Detect Front Panel Jack Detection" option. You'll have to manually switch between the two inputs.
look at the headphone jack, if it has 3 band, it is a stereo jack. the computer is mono.
you need a 2 band jack.
if you look at the jack on the computer, you will see blue(left) and green (right). you canna try to use the green jack.
go to any electroic shop and get a stereo to mono converter.