Question about BenQ MP610 Multimedia Projector

3 Answers

CRACKED Hi our projector was dropped and has cracked lines accross the projection. I cant see any cracks in the lens, i also removed the bulb and there are no cracks in that either. is there a small piece of glass in the projector that may of broken. Mark

Posted by on


3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mp623 is very noisy and vibrating?pls help...and i found broken glass..thank you so much...

Posted on Jan 04, 2012


Hi Mark

I'm a ASP Repairer for BenQ Projectors and it sounds like your Packlight Pipe Module took a blow ( it is a very fragile part )

Quickest way to check if this is well the problem - switch on your Projector and tilt the unit from side to side - if the cracked bits move you can be sure that it is your problem.

Very cheap to have it replaced.

Posted on Mar 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The Stress of impact on the imaging forming unit that is directly behind the projection lens has a flat glass surface. If it is cracked the stress cracks would project with any image because they are on the same plane as the image

Posted on Nov 24, 2007

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The primer bulb doesn't fill with gas

sounds like you hasve a cracked fuel line or a cracked primer bulb. that is why it cant prime.

Aug 29, 2015 | Swisher 190cc 22" String Trimmer Mower...

1 Answer

Cracked lens on epson 3020 projector can it be fixed ? How much$?

Lens for epson 3020,unit price :USD420
Have a good day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry Lampdeng Limited
Mobile: 0086-13178867858
Wechat ID: 008613178867858
Whatapp ID: 008613178867858

Mar 03, 2014 | Office Equipment & Supplies

1 Answer

Lens got dropped and the out glass cracked. Lens

Hi, there.
I assume you mean the 77mm FILTER that was screwed on the lens.

Apr 25, 2010 | Nikon 70-200mm f/2.8D VR G-AFS ED-IF Lens

1 Answer

Infocus X1 Projector started with 3 blinking red lights.

Its due to lamp Ballast power supply is faulty,it need to repair or replace otherwise again it will damage Lamp so be careful

Mar 09, 2010 | InFocus X1 Multimedia Projector

1 Answer

Dropped projector

It may HAVE fractured the solder connections to the RGB connector OR worst case may have cracked the circuit board to the connector.

Resolder the connections AND if necessary, bridge jumpers around the board cracked circuit traces.

Nov 23, 2009 | Hitachi Performa CP-RS55 Multimedia...

1 Answer

Hi I have a cracked Samsung LE25r51bd screen, how

this is a projection television? ive been using prspex in my shop for damaged projector screens, its in expensive and alot easier to source than the brand name or an original one. good luck.

Aug 16, 2009 | Televison & Video

1 Answer

My cinego projector was dropped and now shows a line down the screen

if it was dropped on the front, the lens might have cracked. if it's pixelated, you damaged the dmd chip and you might as well replace the projector.

Jul 12, 2009 | Radio Shack Cinego D-1000 Multimedia...

1 Answer

Sony bravia 50 inch projector tv kdf-50e2010

how do you remove the screen from sony kdf 50e 2010 i have removed screws from top and sides of tv but cant see how to release bottom of screen

Nov 07, 2007 | Televison & Video

Not finding what you are looking for?
BenQ MP610 Multimedia Projector Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Office Equipment & Supplies Experts


Level 3 Expert

2237 Answers

Tom Chichester

Level 3 Expert

40418 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a BenQ Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides