Question about Tut Systems MXL 2300 (61289) Bridge/Router

1 Answer

How can I check that MXL-2300 modem is master or slave and how can changed?

Dear Sir,

I have MXL-2300 router and iwant to check that is it a mater or slave and I also want to know how to change their status from master to slave or slave to master.


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers
Re: How can I check that MXL-2300 modem is master or...

If you have the IP of the device - telnet to the IP and you can change the status in there within the Config page

log on as craft

Posted on Jul 24, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I don't know how to steam Netflicks to my TV. I have a router connected to a LG 3D blue ray player

To do this, you will have to have a working internet connection. this would mean you have a modem/router set up and working. To stream netflix to your tv, you will need a device to connect to your tv such as a blue ray disk or roku device unless the tv has an onboard app for netflix. For more information I will need your exact make and model of your modem/router, netflix device and tv. Hope this helps.

Sep 15, 2013 | Other Network Devices

1 Answer

I have one this modem i dont Know this is for what pleas send me details


I please click here to see the user manual to know how it works and how to configure your router as well what is the use of this router.

Thank in advance!

With Regards,

Jan 19, 2011 | Lucent CellPipe 20A-USB (300402633)...

1 Answer

The dsl modem the i have did not come with an access code .. how do i find it


This Utility program from HP will help you locate few details on your network

This Utility program will help you locate few details of your network like,

1. SSID ( network name )
2. WEP/WPA Key ( Your network security key )
3. The PC/Laptop IP Address
4. Router IP address
5. Which all Devices are connected to your Router/Network Wireless
6. Which all Network are available nearby your place
7. Let you access the Router Configuration

Click here to Download the HP Network Diagnostic Utility

Download the file on Desktop and Run the program ( Ex. File name = HPNDU.EXE )

Follow the Instructions on the Screen and do accordingly.

Nov 06, 2010 | Arris Netopia 2210 ADSL2+ Modem SinglePort...

3 Answers

How do I set up my 7501 wireless router? I have a westell router model a90-750115-07. It was working yesterday with my old modem and we were upgraded to a faster internet modem that allows a home phone....

Admin/password should take you in.
This 7501 is preconfigured to be a wireless router. You should be able to directly connect it to Internet (Cable/DSL modem) to Wan port and use the details of Wireless access in the back of the modem to get connected. By default it is setup to WEP and the access details are on the back of the Westell 7501.
Its available for 19.99 on VErizon site now.

Jan 29, 2010 | Gateway WESTELL INC. A99-327W11-00...

1 Answer

I'm trying to set up my panasonic webcam wirelessly and I'm able to see the camera from my in network but unable to view it from work. Under my 2wire home network router i don't see the webcam as one of...

Dear Sir,
First try to check the ip of your webcam that you have connect by it.
second check the firewall on your router if it use any port and the firewall blocked it.

Sep 11, 2009 | Other Network Devices

1 Answer

Need a driver software for my usb modem has software drivers for all makes and models of modems. You may find you're driver for you're Lucent Asi-2000 USB WAN modem there.

May 26, 2009 | Lucent CellPipe 20A-USB (300402633)...

2 Answers

Verizon Westell 327G wireless connection problem

the best thing to do so that you can isolate the problem is to connect your computer first to the gateway using the ethernet cable. make sure first that connectivity is not an issue if you're using a wired connection. once that's done, try accessing the modem, is the address for your westell. all this is while you're connected with a cable. it will be very hard to fix this issue if you're not wired connected able. check the ip address of your computer. it should start with 192.168.1.xx, any other ip address it will mean your computer is not connected to the modem. if it's a 192 ip address, check the ip add in your modem, it be a routable ip add. for example if you're isp provider is verizon, more often the ip address should start with a 71 to a 74. most likely it will be because you can go online using a wired connection. next thing you should check is your wireless settings in your modem. find out your connection type with you isp. if you have a dhcp or open pppoe, turning off and turning on again your modem will fix things, almost always. if you have a pppoe connection, you have to make sure you have the right username and password. after this, check the properties of your wireless connection by clicking on properties in the wireless network icon, check if you need a WEP key if its secured. sometimes changes in the properties of your wireless network is the problem. if this still doesn't work, there might be a defect with your modem, better call tech support for that. you might need to replace the modem. if you're still under warranty do it now because if not, you will have to buy a new modem if it's found that you have a defective modem.

Mar 08, 2008 | Gateway WESTELL INC. A99-327W11-00...

2 Answers

Lucent cellpipe 20A usb modem

Hi all,

I was having the same problem with Alcatel Lucent Cellpipe modem with Vista. But now its working fine on my system. Just follow the simple steps below and you can get ur internet up and running.

1. Go to > Customer Support > Downloads and Useful links > Modem drivers> Alcatel Lucent 20 A

2. Download and save the file on your desktop.

3. Extract all files.

4. Go to your computer's C drive > Windows > System32.

5. Copy the file "GsiDi32.dll" (DSL installer) and paste it in the folder of the downloaded modem driver. If it asks to replace, click on Replace the file.

6. Connect your modem to the computer and make sure the USB light is on.

7. Ignore the Found new hardware wizard and go to the folder where you saved the downloaded driver files.

8. Run setup.exe.

9. If it gives a dialog box of Missing Entry, just click OK and proceed with the instructions of the setup.

10. Your inetrnet will work fine once you enter your username and pwd.

Hope it works for you all.

Best of luck..

Feb 03, 2008 | Lucent CellPipe 20A-USB (300402633)...

1 Answer

IP address


connect the computer to the Voice terminal VT1005v( WAN port)<---PC and check the ip address on the computer which should be "192.168.102.X". Open the web interface of voice terminal ( type in " " in the address-bar of your internet browser ). you can see the Restore Factory Defaults button and click on it. So you can reset the device. After that, reboot the your whole network.

hope this will fix your problem

Oct 16, 2007 | Other Network Devices

Not finding what you are looking for?
Tut Systems MXL 2300 (61289) Bridge/Router Logo

Related Topics:

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tut Systems Other Network Devices Experts


Level 3 Expert

18258 Answers


Level 3 Expert

1038 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers

Are you a Tut Systems Other Network Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides