Question about Televison & Video

3 Answers

WANT TO CHANGE TO REGION FREE - Televison & Video

Posted by on

  • borlin Jul 28, 2009

    want to change region code on my JVC DRM-70SU
    to REGION FREE

  • borlin Jul 28, 2009

    I have a JVC DVD RECORDER model # DRM-70SU
    i woul like to change the region code to region free preferably or to region 4 from region 1

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,200 Answers

Hi

This DVD can only be made region free via the use of a firmware disk. There is no available remote or button combination that will unlock it -its firmware only. You can however purchase a firmware disk which will make it region free. See this example for your exact model at this link (your model lists as DR-M70)

http://www.multiregionupgrades.com/upgrades/jvc/drm70.htm

Also please take note of the instructions on PAL compatability on this page. If this is applicable to you this will also effect your units ability to show disks from another region especially if you live in an NTSC region at the moment.

Hope this helps. Please remember to rate my answer. Many Thanks.

Posted on Jul 28, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

First off I need the make and model of the dvd player. Also just so you are aware most dvd players can either not change their region or can only change it to a certain region so many times before it is locked to that region.So you cannot make your player region free. One solution to the problem. Is to rip the dvd on your computer then burn it with software onto a blank dvd disc and it will be region free. If you have any other questions or need further assistance please let me know.
Thank you,
Lee

Posted on Jul 28, 2009

Ad

Please provide the make and model of the DVD player and your country.

Posted on Jul 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to make LG BP520 region free?


DVD REGION FREE & BLUE-RAY REGION FREE
To change the Region code on your DVD player, open Control Panel - System - Hardware - Device manager, and click on DVD/CD ROM drives, then right click on the DVD drive and click Properties then click on DVD Region.
You can enter a new region and it also shows you how many changes have been made.
NOTE you can make only 4 changes and the player will lock permanently on the 4th change.
If you want to play DVDs from any region you maybe able to upgrade the firmware to make it region free BUT if you make a mistake or installed the wrong firmware the player will be a piece of junk.
The best solution to make the player region free is to install a piece of software (Passkey for DVD) that allows you to play DVDs from any region and Passkey for Blu-ray that allows you to play Blu-rays from any region. There are several available on the Internet but my favourite is DVD-Region Free From: -
www.dvdfab.com/products,free.htm

Oct 19, 2012 | LG BP-520 3-D Region Free DVD and Region A...

1 Answer

Unlock the dvd code


DVD REGION FREE & BLUE-RAY REGION FREE
To changethe Region code on your DVD player, open Control Panel - System - Hardware -Device manager, and click on DVD/CD ROM drives, then right click on the DVDdrive and click Properties then click on DVD Region.
You can enter a new region and it also shows you how many changes have beenmade.
NOTE you can make only 4 changes and the player will lock permanently on the4th change.
If you want to play DVDs from any region you maybe able to upgrade the firmwareto make it region free BUT if you make a mistake or installed the wrongfirmware the player will be a piece of junk.
The best solution to make the player region free is to install a piece ofsoftware (Passkey for DVD) that allows you to play DVDs from any region andPasskey for Blu-ray that allows you to play Blu-rays from any region. There areseveral available on the Internet but my favourite is DVD-Region Free From:-
www.dvdfab.com/products,free.htm

May 29, 2012 | Computers & Internet

1 Answer

Change to multi regional


This model is not crackable to make it region free. There were region free models available to some markets but if not region free then no way to make it region free.

Mar 10, 2012 | Televison & Video

1 Answer

How can i change the region code on lg hl-dt-st-dvdram gsa- hion dvd burner on pc


You can only change the region code 4 times and on the 4th change the DVD drive will lock permanently on the last change.
To change the region code you can update the firmware in the DVD drive to region free (if there is one available) or install a region free software to defeat the region code.
Please click on this link and follow my instructions and the software solution method :-
http://www.fixya.com/support/r3559135-playing_dvds_from_other_regions

Jun 11, 2010 | Computers & Internet

1 Answer

My pc dvd drive won't let me change region back


No its not a bug most DVD-ROM computer drives allow you 4 or 5 region changes first check your region code and number at DVD Region Info it will tell you region code Australia is 4 UK is 2 sand so one plus you region changes http://www.visualdomain.net/

I however do suggest removing your region code from your DVD-ROM using a region free firmwar or on your PC you can use http://www.dvdidle.com/dvd-region-free.htm it is however a bit pricey the region 0 firmware hack would be better.

Dec 01, 2009 | Computers & Internet

1 Answer

I am unable to change the dvd regional setting to australia (4)but the list says i have one change left


Do you know where to change the region setting?
If not go to the Device Manager - click on DVD/CD-ROM Driver - then right click on your DVD drive, and click on Properties then DVD Region. You can change your region you require.
If you cannot change the region and the region is locked or you have run out of changes, you can install Region Free software on your computer that allows you to play DVDs from any region.
There may be freeware available on the Internet (do a Google search), but I use DVD Region Free from www.dvdidle.com
it costs a few dollars but I have no problems with it, my DVD drive is locked on Region 1.
There are firmware upgrades available for DVD drives that make them region free, but if you make a mistake with the wrong firmware update then your DVD drive is now a piece of junk.

Jun 29, 2009 | Toshiba Satellite A15-S127 Notebook

1 Answer

Change to region code 1


This may help you change to Region 1.

There is more than one model of PS2, and more than one PS2 DVD player module. For some models or modules, only a Messiah 2 or Magic 2 chip installation will make them region free.

However, many can be made region free, for free.
Try this Tip for the steps:

Playstation2 Region Free Fix

I hope that helps.

Feb 28, 2009 | Sony PlayStation 2 (PS2) Console

2 Answers

Wrong region code


Check this thread:

http://uk.answers.yahoo.com/question/index?qid=20080820055911AAxPqVw


If you want to permanently change your firmware and you are comfortable working with this, then check this thread:

http://club.cdfreaks.com/f87/where-latest-version-1-21-pioneer-dvr-112d-firmware-thats-region-free-224385/

Feb 07, 2009 | Computers & Internet

2 Answers

Unlock dvd rom to region free


Download software like region free dvd player then check

Nov 21, 2008 | Computers & Internet

1 Answer

Need to make laptop notebook packard bell dvd region free locked on o1


You can only change the region code up to 4 times then it locks on the last change.
There are some firmware upgrades that can change the drive to region free, if you can screw it up or put in the wrong frmware upgrade then the DVD drive will be a piece on junk.
I suggest you install a region free software that will allow you to play any region DVDs.
Go to www.dvdidle.com to get their Region-Free software, it is not very expensive.

Nov 03, 2008 | IBM ThinkPad R50e Notebook

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

Cindy Wells

Level 3 Expert

5127 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...