If the machine remains without power for a
specific period of time (about 2 hr or more)
while an image exists in its memory, the
power of the vanadium lithium secondary
battery (BAT2) will become exhausted. A
report will automatically be generated when
the machine is turned on.
or
When the jumper plug (JP1) is removed, all data in
control memory will be lost. Therefore, do not
disconnect the jumper plug (JP1). The data stored in
the SRAM is as follows:
- user data (data indicating user mode settings)
- service mode deta (data indicating service mode
settings)
- control data (communications control record of most
recent 20 communications, system dump record)
114 views
Usually answered in minutes!
×