Chair lift shows a blinking 4/ what should I do?

Pride Mobility Products Download the trouble shooting information for your model chair.

Amazon.com: HomCom 3.2" Universal Replacement ...

www.amazon.com/...Replacement.../B008XVEZG8

Amazon.com, Inc.
Rating: 4.2 - ‎123 reviews
Office Chair Pneumatic Gas Lift Cylinder Piston Replacement - Universal Size ... much right on the money and I have to say that the price just simply cannot be beat when you start looking for pneumatic gas lifts! ... ·With PP gas bar cover ....Replacement Office Chair Gas Lift Cylinder Pneumatic Shock - 5" Travel - S6111.

Lift Kits -Body Suspension Lift Kits, Bump Stops & Sway Bar ...

www.4wheelparts.com > Suspension

Lift Kits -Body Suspension Lift Kits, Bump Stops & Sway Bar Bushings ... ShockAbsorber Bushing. Upgrade or replace your ... Shock Link Kit. Shock Link Kit. Lift ...

Complete Suspension Systems and Lift Kits - 4 Wheel Parts

www.4wheelparts.com > Suspension

Owner's manual? trouble shooting? Should have errore codes
No manual? try http://www.manualslib.com/

4 Flashes =
There is a bad connection on the right motor.
Check the right motor connections and wiring
harnesses.

this is the trouble shooting guide that has the error codes listed http://www.pridemobility.com/includes/download.php?f=troubleshooting/INFINFB2045_Jet_3_Ultra_Troubleshooting.pdf
it is a link to a direct download of the .PDF file open with any PDF reader like adobe reader. if you have no reader just go to this link: http://www.adobe.com/uk/products/reader.html
adobe reader it is free

worth a download for future referance.


hope that helps. regards, mark.

It appears that the controls are in Lock Mode. Unlocking Instructions depend on your type of controller. Go to PrideMobility.com to download the proper manuals for chair and controller.

Just checked a site - they suggest that you clear the purge counter, maybe this will help

The jazzy probably has a VSI controller and if it is sleep mode then the lights will scroll rather than blink. Now turn on the chair and see if the blinks have a pause between them, ie 4 blinks pause 4 blinks pause etc If they do count the number of blinks and this will give you the error code ie 4 blinks right motor 3 blinks left motor your owners manual should have a chart listing the error codes If not you can contact Pride tech support @ 1-800-800-8586 ask for jazzy tech support

Hope this helps

The number of blinking lights indicate the problem. Visit this site to determine the cause:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try pushing the manual brake release levers all the way to the floor (with the power chair turned off) then back up until they pop into place then turn the power chair back on. If you continue to have a problem, contact Hoveround, they are good at trouble shooting over the phone.
Good luck!

fantasy when it stops count the number of flashes. For example it might flash 5 times pause flash 5 times pause etc. This is the flash code and your manual will give you what it means. Being an intermittent problem can be a bear to trouble shoot. It would be nice to know what chair you have and whether Medicare purchased the chair for you. If Medicare purchased the chair then they will pay for most of the repair cost Hope this helps you