How to stop end off wash alarm on a haier washing machine, toploader

SOURCE: washing machine

This may be a little late, but it may assist someone else. On my Kleenmaid top loader I found the agitator has clips at the bottom of agitator that clip over a drive hub at the bottom of the "tub" . All you have to do is gently prise it up using your fingers between the bottom of the agitator and the bottom of the tub.
Paul

SOURCE: WASHING MACHINE DOOR WONT OPEN

Call the manufacture it will be under warranty if it's only 6 months old as the machine will have to be torn down to get to the defective switch, just the top will have to come off if your lucky.

SOURCE: nec nw-891 washing machine will not complete the programmed cycle

Apparent malfunction in the timer circuits. Specific Component replacement not available.

SOURCE: Is there any code where i can lock my washing

No code, but try this........Pull out the detergent dispenser by pushing down on the blue indented tab by the softener dispenser and take it with you

SOURCE: Beko A+A Class 1000 rpm

i would check the lint trap for foriegn bodies, e.g hairclips, hair bands, screws etc as these can cause the pump to stop working, be aware that water will immediately come out of the trap when you loosen it, good luck