Changhong LCD TV CHL2243A I cant remember the password, how do I get into tune the tv?

Grab best holiday deals and discount up to $50 on flight tickets to India:

www.tripbeam.com
www.airfarebooking.ca
www.flyopedia.com
www.tripbeam.ca

code ..
just read through a bush TV user manual
does this help any ?


6.LOCK MENU
To enter the LOCK Menu, press MENU button and then press or buttons to select the LOCK Menu.
The default password is 6666.
Please set a new password to so it is easy to remember. Follow the on screen steps to set.

FACTORY RESET NOTE:
If you wish to reset your TV, please select the Restore Factory Default option, this will clear all settings.



Free Bush Flat Panel Television User Manuals ManualsOnline com

I just read the manual for this TV. The initial password set at factory is 0000
If you changed it, you will have to remember what you changed it to, because the menus do have a factory reset option, but it will not reset the password.

I assume you have already tried using the buttons on the side of the TV to adjust it? I would just do a factory reset on it. Enter the TV main menu. Select factory reset to return the TV Menu settings to the factory default values. If this does not fix it unplug to TV for 45min to do a complete hard reset.

• Check the input selection by pressing the INPUT button. You may be watching the wrong input.
• If you cannot hear sound from the TV, you may have accidentally pressed the MUTING button on your
remote control; press the MUTING button again or press VOL + to deactivate muting.
• If the remote control is not functioning properly, the batteries may be installed incorrectly or may be low or
an object or light may be interfering with the remote control.
• To reset the TV to factory default settings:
1 Turn on the TV.
2 Press and hold down the V button on the remote, press the POWER button on the TV set. (The TV
will turn itself off, then back on again.)
3 Release the V button when the TV is turn on.
WARNING: The factory reset will clear all of your customized settings including the Parental Lock setting.
When the Password is lost or cannot remember, enter the master password: 4357. This password clears your
previous password and allows you to enter a new password.

hi,
After factory reset all the settings of the tv will goto factory default. To get the video again you have to auto tune the TV. For the go to the menu and select setup then select Auto program. Wait till the auto tuning end.
OK

Polaroid sets a defualt password for the V-Chip at the factory. The default is 1111, as listed on page 21 of the manual. I would recommend you either change the password to one that you'll remember, or disable the V-Chip entirely.

You try to unlocked all child lock after that on replace Main board or part call tuner in main board

No,must ask Sharp,reset back to factory will not reset password,only setting.Tv should set simple password to easy to remember that the best.Can't switch back to free air,because the password stuck in cable mode.

LOAD FACTORY DEFAULT (from owners manual) Reset the STB back to factory settings 1. Enter 'Tools' menu. Highlight 'Load Factory Default' 2. Press the 'OK' button. You will be asked to input the password 3. Input the password using the numeric buttons (default is '0000') 4. A confirmation window is displayed. Highlight 'Yes' to confirm. STB will return back to factory settings and clear all channels 5. Press the 'MENU' button to exit