Question about ViewSonic N3252w 32 in. LCD Television

1 Answer

My ViewSonic N3252 display is just a black screen in all inputs. Sound works fine but no picture.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

As with most LCD screens the two most problems that cause black screen are bad a solderjoint on the inverter board or bulging capcitors, the next problem would be most likely the power mosfets witch break down after time.

Posted on Jul 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Black screen with sound


My 47" LCD Smart T.V. was working fine last night. I got up this morning and I have sound but no picture. The VIZIO icon lights up as usual but I get no picture, only sound. From the time I turned it on, nothing appeared on the screen. I have already tried unplugging it for a while and still nothing.

Oct 24, 2012 | Vizio VO47L 47 in. LCD TV

1 Answer

Viewsonic VPW425 No inputs working


Seem like the power supply hav blow off inside the unit.

Jul 02, 2008 | ViewSonic VPW425 42 in. Plasma HDTV

1 Answer

How to reset tv. Have sound but black screen


LCD's use a colorful crystal see through display which only visible when light is shining through it. if you have sound and no picture it's always a faulty PSU. Very easy to change out actually.

Mar 27, 2010 | Vizio GV42L 42 in. LCD Television

2 Answers

Screen stays either black or white


Replace the entire DAC board (board with power suplly going into it) for easiest solution.

Aug 19, 2009 | ViewSonic VA703mb Monitor

1 Answer

New ViewSonic PJ 513DB connected to laptop. Cannot see DVD


I think this is your laptops problem with putting out that on both displays at the same time try cloning or playing with those settings

Mar 07, 2009 | ViewSonic Office Equipment & Supplies

1 Answer

ViewsSonic n3000w sound working, but picture is not


Your inverter is bad. i think there's 8 transformers.. one for each backlight.. one of them is sorted and is bad.. if you know something about electrics you can try to find one transformer or you can try to find the whole inverter.. good place for parts is http://www.lcdparts.net

Oct 25, 2008 | ViewSonic N3000W 30 in. HD-Ready LCD...

2 Answers

DVI connection fault


I had the same problem, you must call Viewsonic to change your screen. The DVI input on the screen is dead.

Jul 08, 2008 | ViewSonic VX2255 Monitor

1 Answer

DIBOSS tv shows no picture


Me too! Apparently Diboss are no longer trading, so no help there. I am aware that these panels have a common power supply issue, the faulty chip is only available from China and the last one I fitted only lastest a couple of days. However the fault described above is not the same. I've checked the psu outputs; all are fine and nothing changes when the picture disappears, therefore I can assume that I'm not looking at a PSU fault. As Iain says above, it appears to be a signal link, however I have no picture on ANY input and without circuit diagrams I cannot find any component that's common to all the various inputs. This leads me to think that either the backlight, or the screen itself is faulty. I'll keep trying and if I get it sorted I will report back.

Jon

Feb 27, 2008 | Televison & Video

Not finding what you are looking for?
ViewSonic N3252w 32 in. LCD Television Logo

1,069 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Televison & Video Experts

Cindy Wells

Level 3 Expert

5186 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a ViewSonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...