Question about Office Equipment & Supplies

1 Answer

Light isn't moving for copying

Copies are blank. If I keep the cover open, I can see that the light is not moving down the white belt. What would be the reason for this? And can I repair?

Posted by on

  • dgilpin710 Jul 30, 2009

    It's a SHARP AL-1651CS

  • dgilpin710 Jul 30, 2009

    It's a SHARP AL-1651CS

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Office Equip... Master
  • 1,297 Answers

Whats model the copier machine?

Posted on Jul 30, 2009

  • Adorjani Laszlo Jul 31, 2009

    Your expo unit is OK,expo lamp is lighting.Please check:
    1.In the PC drum charge corona installed correctly,check the corona wire.
    2.In the PC Drum Unit in position?
    3.Check and change if necesary the comb electrod and grid.
    4.Check and change if necesary the transfer/separator corona wire or holders.
    5.Clean the optics,lens,mirrors.
    Pull out the transfer/separator corona unit(under OPC Drum) and remove the separator wire and push the T/S unit in her location and make a copy.If the copy quality is OK,change the T/S corona front holder.


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer will not make copies.


Open flatbed scanner cover., try for copy, verify scan head moving or not? & the same time check light is glowing or not.. if it is not moving, might be mechanical issue, if light is not glowing scan head faulty, need to replace..

May 01, 2015 | HP ENVY 5530 E-ALL-IN-ONE PRINTER 1200X600...

1 Answer

Samsung scx4623f prints out and copies come out blank


If it prints out from your PC but doesn't copy, the scanner isn't wworking. Maybe the light.

Jul 18, 2011 | Office Equipment & Supplies

1 Answer

Canon 7130 black and white copier. It looks like it is scanning but blank pages come out. I changed the toner and nothing. There are no alarms. also can this machine still be bought?


**** open the copier to see if the developer has fallen away from the drum unit or is the tab below where the toner is put in out of place. Sometimes, if out of place, when the copier closed shut the arm is moved to the right side of the post ( located on the lower half of the copier ) and move the developer away from the drum unit and produces light copiers or even blank copies.

May 17, 2011 | Canon NP 7130 Black and White Copier

1 Answer

Blank copies, mech. not moving, lock is in the unlock position


maybe scan unit cannot move open top cover and see if scaner lamp moves or not

May 20, 2010 | Sharp AL-1655CS Copier

2 Answers

Instructions for scanning on epson cx4300/cx5500/dx4400


Hi there,
Scanning the Document

Place the original on the glass.
1) Open the document cover and place your original face-down on the glass, in the upper left corner. Move your original about 1/10 inch away from the top and left edges so all of it will be copied. 2) Close the cover gently so you don't move the original . Caution : Never open the document beyond where it stops and do not place heavy objects on top of the CX4600. If you need to copy or scan a thick or large document, you can remove the document cover. Just open it and pull it straight up. If you need to press the document flat while you copy or scan it, do not press too hard and be careful not to move it. Caution : Do not use excessive force on the document cover, and do not twist it diagonally. You may damage the document cover. When you are done, replace the document cover by inserting the tabs back into the slots. Copying a document. 1) Load paper. 2) Press copy button until you see the desired number of copiesin the Copy window You can select up to 9 copies at a time. 3) Press the paper type button to select PLain Paper. The light indicates which type is selected. 4) Press the paper size button to select Letter. 5) If you want your copies automatically reduced or enlarged to fit the loaded paper size, press the Fit to Page button. 6) To make color copy, press the Start Color button To make black and white copy, press Start B&W button. The ON light flashes and after a moment the CX4600 starts printing. If you need to stop copying at any time, just press the Stop button. Do no pull out paper that is printing, it will eject automatically to the output tray. Hope this helps. Please rate my response. Thanks Have a good day.

Nov 25, 2009 | Epson Stylus CX4600 All-In-One InkJet...

1 Answer

Light bar does not move. copies come out blank


Have you verified that the scanner is not in the locked position? There is a unlock switch located underneath the paper exit. First power the printer down lock and then unlock this switch then repower the printer and try your scan again.

Mar 23, 2009 | Xerox WorkCentre M20i All-In-One Laser...

1 Answer

Canon Copier Model C122F - error light flashing


A common mistake is that people think that the waste toner needs to be emptied and instead the toner needs to be replaced --- and vice versa. Check to make sure that the toner bottle is not empty. Also, if you made copies that took ( used ) more toner then the machine was able to replenish, the machine has not had a chance to catch up. Place a white sheet of paper on the platen glass and make blank white copies. You may only be able to get 1-2 copies at first but as the device catches up with the toner replenish you should be able to make more. The blank copies you make -- do NOT put that paper right back into the machine. Lay it flat and let it cool, this will help prevent unwanted jamming due to heat build up in the paper. IF you have good amount of new toner in the machine, gently tap the front line ( or rear line) that feeds the used toner into the waste bottle. Sometimes the waste toner will clog and back up into the machine giving false 'waste toner full' message.

Jan 04, 2009 | Canon Office Equipment & Supplies

2 Answers

Prints and scans fine, but copies are all black


Hold down the auto expsoure key the the lights will began to blink light copies then push it again to hold lighter expsoure.

Jul 18, 2008 | Sharp AL-1642CS Copier

1 Answer

Canon PC941 Copier: Wide white bar down middle of copies


Try replaceing the cartridge the toner has run out.
Any problems please get back to me.
Thank You

Mar 25, 2008 | Canon PC-940 Black and White Copier

3 Answers

Copies print all black


Make 1 copy with the lid open & verify that the scan lamp is lighting & that the scanner moves. A blown lamp is the most common cause for all black copies.

Jun 11, 2007 | Gestetner 5499 Black and White Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...