How do i connect my Bush sound bar to a panasonic freeview tv

Make certain you have a good aerial connected to the TV before you attempt to rescan. If all is good and it won't rescan, try the factory reset option.

When you say you have freeview channels, and then say you cannot get Sky channels this is not enough information that you have provided, but
I presuming in addition to freeview channels you also have a Sky Satalite receiver which is no longer connected to your Tv or your sons tv Either way Sky satalite have 2/4 lines which means you can have four viewings providing multi rooms is bought from sky, and additional boxes are fitted.
Or you can have 1 sky box main Tv and no the spare cable feed at the back of the sky box you can feed another cable to another tv from that same box but it will be same channels But you can now change channels using magic eye receivers etc, in any room.

But the question I believe is you had freeview but no long can receive sky channels the information is a little vague but hopefully I have helped a little

It is possible that you have not got the right sound settings for the blue-ray or other equipment. Check that each device, especially the blue-ray is outputting the sound via the HDMI. Look at the sound settings using the remote for each device. The best sound is often obtained by using an optical lead. So if your devices have the connections for an optical lead, buy one of them and enjoy the superior sound of the blue-ray. HD channels on Freeview also offer Dolby sound, which you can get with an optical link better.

The problem is probably in how your audio is liked up. Is the connection from DVD to TV via hdmi, scart, phono, RGB, optical? You need to check that the video link from DVD to TV and the audio link from DVD to TV are the same. Hope this helps.

I get a similar issue from my Bush sound bar. The sound drops out when the tv programme/movie etc has a period of silence in the audio track or just very low background music (no speech). As soon as someone begins to speak it starts up, but usually it misses the first couple of words. Bar is connected directly to a Samsung tv via the optical cable. Any ideas?

It is possible as when the jack is used with a plug into it, it is designed to cut the sound to the speakers in the set.

contrast problem

Check the scart lead is fully in on the box and the tv

I have a Bush 6690D and I can confirm that it does have a built-in digital decoder for terrestrial signals (Freeview).

Have you checked whether ***********'s TV is set to digital mode ? The "Mode" button on the remote cycles between analog, digital and AV inputs.

how can i change the sound from 6.0 to 5.5 the tv is bush but the philips remot can oparet it is it rong