Question about Sony Cyber-Shot DSC-H1 Digital Camera

1 Answer

FLASH LIGHT BULB of my DSC H1 digital camera HAS BLOWN

I own a DSC H1 for the past 5 years and it has given me excellent service. I was taking a picture with my camera with the flash, when i heard a minor 'phut' sound and the flash didn't work. I looked at the flash closely and i find that the bulb within the flash chamber has broken into bits. i can see and move the fragments of the bulb within the flash.
The camera still works fine and takes pictures without flash in bright sunlight but pics indoors are poor unless taken in bright indoor artificial light. Need to know if it can be repaired and at what approximate cost.Thanks - Bhakay

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

You need to replace flash bulb board of DSC-H1 as shown in below image. (item # 304) Part number is as follows..
A1119331A ST-124 BOARD, COMPLETE
It is available in Part Store.
Replacement of ST-14 board (flash bulb board) requires expertise and solder work.
Thanks.

Posted on Jul 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DSC-H2


Your lens block is faulty,must replace it

Nov 23, 2011 | Sony Cyber-shot DSC-H2 Digital Camera

1 Answer

My Sony DSC H1 Camera easily get drains the batteries. I already tried to replace new batteries 3x and when i use it, just take 5 shots and the battery was drained already.


If you are shooting with flash and using alkaline batteries, this certainly could be the case. If you are using lithium batteries or NiMH rechargeable batteries and are not shooting with flash, and are having this problem, then there is likely some internal problem with the camera that is draining the batteries unnecessarily.
In that case, you'd want to take the camera to a repair shop for troubleshooting.

Mar 11, 2011 | Sony Cyber-Shot DSC-H1 Digital Camera

1 Answer

How do you change an interneal flash on a dsc-h1


Hi there you need to open the camera casing then you can remove the flash light. But if you want to do this at home you need to know chip level circuit board repairing. ask me if any thing else.

Jan 15, 2011 | Sony Cyber-Shot DSC-H1 Digital Camera

1 Answer

Sony cybershot dsc-h1 flash bulb has blown


You need to have it fixed at a service center.

Aug 13, 2009 | Sony Cyber-Shot DSC-H1 Digital Camera

1 Answer

Dsc-h1


Hello,
Put camera in Auto mode (green mark) on Jog dial at top and there is control / navigate switch near LCD, check upper button, it has Flash sign / mark on it. Press this button and observe Flash mark(yellow) in LCD.
Flash is ready now and take picture.
Need further help, let me know.

Dec 06, 2008 | Sony Cyber-Shot DSC-H1 Digital Camera

1 Answer

Flash


I guess it should be replaced, but not sure.

Apr 30, 2008 | Sony Cyber-Shot DSC-H1 Digital Camera

1 Answer

Recharge of flash


Sony H1 camera has a delay to recharge the flash and I hope that you know that as you are using it for the last three years. If the time delay is a new issue check the MAH of the battery to ensure that it will be above 2200 at least. If the MAH is below 2200 it is natural that the time delay will be more to recharge the flash. If my solution proves good please rate it. Regards.

Mar 06, 2008 | Sony Cyber-Shot DSC-H1 Digital Camera

1 Answer

I cant use dsc h1 with strobe light


If you problem is that the double flash triggers the strobes early (on the first flash and the shot is made on the second flash - dark) you either:
1. Get a wire accessory to command the strobes
2. Put a simple external flash on top of the camera and use it to trigger strobes. If you don't need the light from this flash just point it up of backwards, it will still trigger the strobes. If it does not rotate, you can use tin foil. A very simple external flash will do, as the camera will flash only once with external flash.

Jan 09, 2008 | Sony Cyber-Shot DSC-H1 Digital Camera

Not finding what you are looking for?
Sony Cyber-Shot DSC-H1 Digital Camera Logo

453 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

kakima

Level 3 Expert

102366 Answers

james laughton
james laughton

Level 3 Expert

2166 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

22068 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...