I've seen pics of the LED lights on the outer part of the phones hinge's. Are they supposed to be functional? Or was that just mabey a photo enhancement to give the phone a more uniqe look.?And if so how can i turn them on?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There's a tiny magnet in the top of the flip, near the hinge.. try taking a small magnet and hold it over the keypad near the hinge, and see if it doesn't think it's closed, if that magnet didn't get put back in the flip, then the phone won't know it's closed.
Ever looked at the power specifications of a mobile charger?? well if
not, then have a peek... u will read that the output voltage is 5V
DC........ the computer USB also has a voltage output of 5V
DC........... any USB based electronic device needs this power to get
started.... The laptop coolers u get basically work on this power from
the USB... U'll notice that the USB ports have 4 terminals.... the
extreme outer side are the POWER terminals +ve and -ve..... the middle 2
are the BUS lines IN and OUT.... a BUS is something electric conductive
that allows the flow of 0's and 1's or rather high and low voltages to
pass(Basic IT theory).... so this 5V DC can be used for doing anything;
charging the mobile phone battery to lighting up entire rooms with
LED's, making laptop coolers, etc......... Every mobile phone which has
the USB connectivity option gets charged when plugged in... so sometimes
even if u dont have the Mobile charger dont panic, find a computer and
plug in the USB... not only micromax x225 mobile but, there are almost 80% mobiles which
charge by connecting it to pc. Only nokia phones don't get charged. it
is a good feature don't worry
Open door, unscrew hinge, Pull door top door off first, then remove middle hinge, then second door, then third hinge. ( good to take pic before so you know what direction the hinges are facing. When putting on, put bottom hinge on first, then door (tape it close and in place) then second hinge, the top door (tape in place, THen finally the top hinge. Once hinges are in place, remove tape.
if the rredlight is blinking you can take the phone and have it reflash.....if the redlight is constant then you will need to have the mainboard check the board could be bent....so pls take it to a mobile store and have it check'd out...
I was able to take apart a VX8350 I have with a broken screen. I don't see any way to replace just the hinges with replacing the whole top part of the phone including the screen. The ribbon cable from the screen runs through the hinge part into the main assembly of the phone. It appears the cable can't be removed without cutting it.