Question about Panasonic NV-DS60 Mini DV Digital Camcorder

1 Answer

Power lamp blink

When I tern on the camera the power lamp is on. after few seconds of recording the power lamp blinks and the camera stop from recording

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

The fix is really easy and costs nothing, just 10 minutes of your time!

*I fixed mine (twice) this way*

Turn the cam over.
remove all the screws holding the dark plastic bottom on the camcorder, remove it carefully.
Now you will see the ribbon cables, VERY GENTLY, wiggle them from left to right (about 1mm each way), then push them in.
Test by putting your battery back on and see if it holds a tape, or plays without blinking and switching off - you will be happy.

The fault is simply that one cable (I can't tell you which one) becomes loose over time, so it just needs to be pushed back in and the condensation error and/or the door closing problem go away!

A lot of folks are buying cams off eBay like this as it's such a simple repair!

Good luck - please help others - post back if it works!

Posted on Feb 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nec vt540 vt540k


probably needs filters cleaning or a new lamp replacement.

Oct 07, 2013 | NEC VT460 Multimedia Projector

1 Answer

I'm assuming that it is an error code. The red


colour wheel issues and defective lamp replacing lamp and light engine color wheel cos its worn out

Jul 07, 2013 | Televison & Video

1 Answer

Red light blinks six times. When I hit power button green light stays on for a few seconds, turns off the on for a few more. Then goes back to pattern of red light blinking six times.


the kill switch is open ensure the lamp cover presses firmly on the kill switch when u close the lamp chamber door the red light will stop blinking and u can now turn the tv on

Jul 06, 2013 | Televison & Video

1 Answer

After power on camera moved right and left after few second power & Standby lights blinking


If the STANDBY lamp flashes

The micro computer inside the camera

might not memorize the current pan/

tilt position properly. Press the PANTILT

RESET button to reset the pan/
tilt position.

Sep 17, 2010 | Sony EVI-D100 Webcam

1 Answer

Is there a timer on this camera?


Yes there is .......page 47 of the manual shows you how .... its an option on the drive mode in the startup menus.

http://safemanuals.com/user-guide-instructions-owner-manual/KONICA%20MINOLTA/DIMAGE%20Z1-_E

Self-timer
Used for self-portraits, the self-timer will delay the release of the shutter for approximately ten seconds after the shutter-release button is pressed. The self-timer is set on section 1 of the recording menus (p. 44).

With the camera on a tripod, compose the picture so the subject is within the focus frames. Press the shutter-release button partway down to lock the exposure and focus (1). Press the shutter-release button all the way down to begin the countdown (2).

Because focus and exposure are determined when the shutter-release button is pressed, do not stand in front of the camera when taking a self-timer image. Always confirm the focus with the focus signals before beginning the countdown
(p. 25).

The self-timer is counted down on the monitor. During the countdown, the self-timer lamp on the front of the camera (3) will start to blink and is accompanied by an audio signal. A few seconds before the exposure, the self-timer lamp will blink rapidly. The lamp will glow steadily just before the shutter fires.

To stop the countdown, slide the zoom lever to the left or right. The self-timer drive mode is reset to single-frame advance after the exposure. The audio signal can be turned off in section 2 of the setup
menu (p. 83).

Mar 03, 2010 | Konica Minolta DiMAGE Z1 Digital Camera

1 Answer

Flip Hd stopped working. USB light blinking, but red light not on. Cannot start, record seems "dead". How do I restart?


Im guessing press the reset button the bottom, with a paperclip and hold it for 3-5 seconds and try it again, it night take a few trys but it has worked for me a few times... worth a shot ?

Dec 25, 2009 | Pure Digital Flip Mino Digital Camera

1 Answer

ERROR CODE AT START RECORD C:31:23


C:31:23 s reel error
try to change the tape,actually this problem is related to the tension ,new tape have more tension as compared to the old one(used one).

Jun 24, 2009 | Sony Handycam DCR-TRV250 Digital Camcorder

1 Answer

Ready lamp on 283


When the flash goes into battery saver mode, which it does automatically, the light will blink.
If you are using the external power source, the light should remain steady.
Jeff

Oct 30, 2008 | Vivitar 283 Flash

1 Answer

Power lamp blinks


The fix is really easy and costs nothing, just 10 minutes of your time!

*I fixed mine (twice) this way*

Turn the cam over.
remove all the screws holding the dark plastic bottom on the camcorder, remove it carefully.
Now you will see the ribbon cables, VERY GENTLY, wiggle them from left to right (about 1mm each way), then push them in.
Test by putting your battery back on and see if it holds a tape, or plays without blinking and switching off - you will be happy.

The fault is simply that one cable (I can't tell you which one) becomes loose over time, so it just needs to be pushed back in and the condensation error and/or the door closing problem go away!

A lot of folks are buying cams off eBay like this as it's such a simple repair!

Good luck - please help others - post back if it works!

Nov 22, 2007 | Panasonic NV-DS60 Mini DV Digital...

Not finding what you are looking for?
Panasonic NV-DS60 Mini DV Digital Camcorder Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Video Cameras Experts

Kenneth Walker

Level 2 Expert

187 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1886 Answers

yadayada
yadayada

Level 3 Expert

78289 Answers

Are you a Panasonic Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...