Question about StarTech.com StarView SV431USB 4-port KVM Switch

1 Answer

I am looking for the codes for Alibi

I have a new Star View Box. I have a lot of channels but would like to have the Alibi Station for my wife.

Posted by on

  • 3 more comments 
  • doxer100 Jul 28, 2009

    I'm in ROI
    Its a Starview super usb

    Don't know whether it is latest firmware or just fta firmware. How could I fdind this out.

  • doxer100 Jul 28, 2009

    model id c500
    sw version 1.10
    boot version b - 11
    23 june 2009

  • doxer100 Jul 28, 2009

    model id c500
    s/w version 1.10
    boot version b/11
    23 june 2009

  • Alun Cox May 11, 2010

    press menu select system informationpress OK and let me know what it says. I'm popping out for about an hour but will get back to you.

  • Alun Cox May 11, 2010

    Was your starview supplied with the latest firmware or just the FTA firmware? Is it the starview super usb? Are you in UK or ROI?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,666 Answers

You do not have the FTA version however I have heard of v 1.10 causing problems and that the v 1.09 beta is better but I cannot comfirm this as I'm in the UK and the new encryption system (Nagra 2) hasn't been implemented here yet.

I can and will make enquiries with some techies in the ROI to find out the solutions for you and also contact one of the encoders to see what the state of play is but I won't be able to get back to you until tomorrow.

In the meantime if you want to give v1.09 a go I can send it to you
just email me at pippincp@msn.com as I said above I cannot confirm it will sort out your problem and/or you can go to afterdawn.com and there will be a multitude of advice and information there. You will need to register (free) and search the forums for starview super usb before you make a post. Whatever you do DO NOT ask for keys.(could lead to instant ban!)

Unfortunately the ROI has been used in the past as a teast bed for new coding and encryption in the past but it gives the encoders something to work on.

The person who sold it to you shoud've known and advised you of the problems. Have you contacted them?

I hope the above is helpful and informative you may contact me at the above addy any time in the future please put starview in the subject field.

Regards

Pip

Don't forget to rate it.


Posted on Jul 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Star View on front of box. All channels gone down except bbc ones


the premium channels have all been scrambled and there are no fixs yet to this problem sorry

May 19, 2010 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

StarView SV431USB 4-port KVM Switch: 00 ans 01 codes for star view box please...


oo 01 codes are allready here but they are no longer working as the majority of channels are no longer working

May 17, 2010 | StarTech.com StarView SV431USB 4-port KVM...

8 Answers

Need new codes for star view box super on virgin/ntl


this box updates automatically. virgin have found a way to cut the signal off. you can press menu then numbers 1570 and go onto nagravision menu and it will tell you how to enter the code.
if you can't get this menu then you havent got the right firmware in the box. hope this helps.

Dec 20, 2009 | StarTech.com StarView SV431USB 4-port KVM...

3 Answers

Starview 1 box codes please


aa b7 d1 d9 ce 8e 83 af
8e 80 d7 ef 44 93 02 2b

Sep 18, 2009 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

Codes for ntl star view box


Not 100% certain that this'll work but this is what I did & hopefully it'll work for you too - good luck :- Subject: Star View 3 The Box Super when channels discappear ;o) 1. Press menu then Factory Setting & Enter code 0000 to reset. 2. Exit to main menu & enter 1570 to get into the CASS SYSTEM & turn EMU on 3. Reinstall channels (Goto Installation, Cable network (try TW first & if no channels try NTL then C & W and so on - I'm with Virgin & used the setings for TW) & Voila ;o) Nb: You may have to redownload channels so reconnect yr box to the computer & follow the link below http://www.4shared.com/file/76886028/fd4ac296/GTRom_the_box_Super_8102e_081129.html?err=no-sess & press download !!!

Jun 29, 2009 | StarTech.com StarView SV431USB 4-port KVM...

1 Answer

Star view is not working only showing limited channel


Subject: Star View 3 The Box Super when channels discappear ;o)
Hiya this is what I did & hopefully it'll work for U too - 1) Deleted all th channels & reset 'factory settings' by entering the code 0000, turned th box off waited a couple of minutes & turned it back on !!! 2) You may have to redownload channels so reconnect yr box to the computer & follow the link below (But try without doing this & goto stage 3) first & please let me kno if that works :- http://www.4shared.com/file/76886028/fd4ac296/GTRom_the_box_Super_8102e_081129.html?err=no-sess ) & press download !!! 3) ReConnect & Turn box back on; goto menu & press 1570 to get into the CASS SYSTEM & turn EMU on Reinstall channels & voila

Jun 21, 2009 | StarTech.com StarView SV211K 2-port KVM...

1 Answer

The box super looking for new code updates


Not 100% certain that this'll work but this is what I did & hopefully it'll work for you too - good luck :-
Subject: Star View 3 The Box Super when channels discappear ;o) 1. Press menu then Factory Setting & Enter code 0000 to reset. 2. Exit to main menu & enter 1570 to get into the CASS SYSTEM & turn EMU on 3. Reinstall channels (Goto Installation, Cable network (try TW first & if no channels try NTL then C & W and so on - I'm with Virgin & used the setings for TW) & Voila ;o) Nb: You may have to redownload channels so reconnect yr box to the computer & follow the link below http://www.4shared.com/file/76886028/fd4ac296/GTRom_the_box_Super_8102e_081129.html?err=no-sess & press download !!!

Jun 04, 2009 | StarTech.com StarView SV211K 2-port KVM...

2 Answers

Star view box will only display free view channels, what do I do?


HAVE YOU SORTED YOUR BOX OUT? IF NOT LET ME NO AND ILL TALK YOU THROUGH IT

Jun 27, 2008 | StarTech.com StarView SV211K 2-port KVM...

Not finding what you are looking for?
StarTech.com StarView SV431USB 4-port KVM Switch Logo

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top StarTech.com Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

mbowen171
mbowen171

Level 2 Expert

15 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a StarTech.com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...