Question about Computers & Internet

1 Answer

Microsoft lifecam1.4 unable to work

No,i am using window xp.my problem is after i follow the exact step to install my lifecam 1.4 cd when i double click on lifecam shortcut i show a message that microfoft has encounter a problem and has to close. which means my lifecam was unable to work. any one help to solve my problem???

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Follow the instructions below and it will work.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work.

Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.


A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger

1. On the VIM sign-in window click on Edit.
2. Then click on Settings Enhanced IM.
3. Next click on Enhanced IM.
4. Then click on Audio Video.
5. The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera

Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
Notes:
· The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
· images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.

After you get your camera installed properly, DO NOT unplug it from the USB port as it will cause
the drivers to be corrupt and render the camera unusable till reinstalled it properly.
Hope this helps. Bud

Posted on Sep 27, 2009

  • Weldon Dube'
    Weldon Dube' Nov 20, 2009

    Follow the instructions below and it will work.

    Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

    When the program asks you to connect the camera to the USB port, do so and it should work.

    Then to use it on the Web, do this.
    Web Camera’s have to be setup on the program they are to be used with. Just installing the
    camera on your computer does not set it up to broadcast on messengers or Skype.

    Each program has Options that have to be setup in order for the Audio and Video to function
    properly.


    A. Skype Setup:

    After downloading and installing Skype http://www.skype.com/intl/en-gb/download... set it up as follows:

    1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and
    Speakers to the computer Audio Card.
    2. Then click on the Video Settings.
    3. The camera if Installed Properly will come up and show a video picture.
    4. Then, on the bottom of the page click on Save.

    The camera and audio should function properly. Your friends and Family will now be able to
    see and her to you.

    B. Yahoo Setup:

    After downloading and installing Yahoo Messenger

    http://www.soft32.com/download_30.html )

    set it up as follows:

    1. Go to Messenger at the top left and click on it.
    2. Next go down to Preferences and click on it.
    3. Next Calling and Devices on the right and set the Microphone and Speakers to the
    computer Audio Card.
    4. Next go to the Test Audio section and (in blue writing) click on “Open the call
    setup assistant” and follow the instructions on the left window.

    C. Windows Live Messenger:

    1. After you start Windows Live Messenger, expand the view by clicking on the square on
    top left next to the red X.
    2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.”
    And then click on “Show the Menu Bar”.
    3. Next go to the Menu Bar on right side, click on “ “Action.”
    4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
    NOTE: Your audio and video should work. Enjoy.

    When done both the Audio and Video will function properly so you can chat and see family or
    friends you are connected to.

    D. AIM (AOL) Messenger

    1. On the VIM sign-in window click on Edit.
    2. Then click on Settings Enhanced IM.
    3. Next click on Enhanced IM.
    4. Then click on Audio Video.
    5. The Audio and Video portion has drop downs so you can select the proper audio card and
    video camera installed in you computer.
    The Audi Video drop downs are
    Microphone
    Speaker
    Camera

    Adjust Your Audio and Video Settings:
    In order to adjust your audio and video settings, please follow the steps given below:
    1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window.
    If you are currently participating in an AOL Live Video IM session, a message will display:
    You must disconnect the current AOL Live Video IM conversation before running setup. Would you
    like to disconnect now? Click the Yes button.
    2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers
    and microphone are working properly. Follow the on-screen prompts.
    Notes:
    · The first time you use AOL Live Video IM, a message will display: Would you like to
    first check your audio and video settings? Click the Yes button. The Audio and Video Tuning
    Wizard will appear to help you verify that your camera, speakers and microphone are working
    properly. Follow the on-screen prompts.
    · images in AOL Live Video IM may appear reversed, or as a mirror image (text may
    appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
    After making the settings your ready for a chat and video talk with your Family and Friends.

    After you get your camera installed properly, DO NOT unplug it from the USB port as it will
    cause the drivers to be corrupt and render the camera unusable till reinstalled it properly.
    Hope this helps. Bud


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not download xp


Step 1:
SP3 is the third and final service pack released for Microsoft Windows XP, and it eliminates many of the security holes that previously affected XP. While Microsoft recommends that users download SP3 using Windows Update, some users are unable to do so. However, it's easy to create a Windows XP SP3 installation CD; it requires only that you download the pack from the website and burn it to a CD-R/DVD-R using an ISO burner program.
Download the SP3 installation ISO by visiting the first link listed in the "Resources" section of this article. Save it to your Desktop. Download ImgBurn and save it to your Desktop. Double-click the installation executable for ImgBurn and click "Next." Follow the remaining onscreen prompts and click "Finish" to complete installation of ImgBurn. Insert a blank CD-R/DVD-R into your DVD drive. Open ImgBurn by going to "Start," "Programs" and "ImgBurn." Click "File," then "Browse for a source file." Navigate to your Desktop and select the SP3 ISO file. Click "Open." Click the blue "ISO to CD" button located on the bottom left of ImgBurn. The program will begin creating the Windows XP SP3 installation CD. This process may take anywhere from 10 to 20 minutes to complete depending on the speed at which the CD-R/DVD-R is being burned. Click "OK" once the CD-R/DVD-R has finished burning. You've successfully created a Windows XP SP3 installation CD.
http://www.microsoft.com/downloads/details.aspx?FamilyID=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en XP PRO SP3 ISO Download the iso also download the imageburn http://www.imgburn.com/
http://windows-xp-pro-startup-disk.soft32.com/ http://support.microsoft.com/kb/322389

Feb 22, 2013 | Computers & Internet

1 Answer

Need xp download for usb boot


Step 1:
SP3 is the third and final service pack released for Microsoft Windows XP, and it eliminates many of the security holes that previously affected XP. While Microsoft recommends that users download SP3 using Windows Update, some users are unable to do so. However, it's easy to create a Windows XP SP3 installation CD; it requires only that you download the pack from the website and burn it to a CD-R/DVD-R using an ISO burner program.
Download the SP3 installation ISO by visiting the first link listed in the "Resources" section of this article. Save it to your Desktop. Download ImgBurn and save it to your Desktop. Double-click the installation executable for ImgBurn and click "Next." Follow the remaining onscreen prompts and click "Finish" to complete installation of ImgBurn. Insert a blank CD-R/DVD-R into your DVD drive. Open ImgBurn by going to "Start," "Programs" and "ImgBurn." Click "File," then "Browse for a source file." Navigate to your Desktop and select the SP3 ISO file. Click "Open." Click the blue "ISO to CD" button located on the bottom left of ImgBurn. The program will begin creating the Windows XP SP3 installation CD. This process may take anywhere from 10 to 20 minutes to complete depending on the speed at which the CD-R/DVD-R is being burned. Click "OK" once the CD-R/DVD-R has finished burning. You've successfully created a Windows XP SP3 installation CD.
http://www.microsoft.com/downloads/details.aspx?FamilyID=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en XP PRO SP3 ISO Download the iso also download the imageburn http://www.imgburn.com/
http://windows-xp-pro-startup-disk.soft32.com/ http://support.microsoft.com/kb/322389

Feb 20, 2013 | Dell Inspiron 2600 Notebook

1 Answer

Windows\system32\config\system file is missing or corrupt


Step 1:
SP3 is the third and final service pack released for Microsoft Windows XP, and it eliminates many of the security holes that previously affected XP. While Microsoft recommends that users download SP3 using Windows Update, some users are unable to do so. However, it's easy to create a Windows XP SP3 installation CD; it requires only that you download the pack from the website and burn it to a CD-R/DVD-R using an ISO burner program.
Download the SP3 installation ISO by visiting the first link listed in the "Resources" section of this article. Save it to your Desktop. Download ImgBurn and save it to your Desktop. Double-click the installation executable for ImgBurn and click "Next." Follow the remaining onscreen prompts and click "Finish" to complete installation of ImgBurn. Insert a blank CD-R/DVD-R into your DVD drive. Open ImgBurn by going to "Start," "Programs" and "ImgBurn." Click "File," then "Browse for a source file." Navigate to your Desktop and select the SP3 ISO file. Click "Open." Click the blue "ISO to CD" button located on the bottom left of ImgBurn. The program will begin creating the Windows XP SP3 installation CD. This process may take anywhere from 10 to 20 minutes to complete depending on the speed at which the CD-R/DVD-R is being burned. Click "OK" once the CD-R/DVD-R has finished burning. You've successfully created a Windows XP SP3 installation CD.
http://www.microsoft.com/downloads/details.aspx?FamilyID=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en XP PRO SP3 ISO Download the iso also download the imageburn http://www.imgburn.com/
http://windows-xp-pro-startup-disk.soft32.com/ http://support.microsoft.com/kb/322389

Feb 13, 2013 | Microsoft Windows XP Professional for PC

2 Answers

How to install my web cam


Method 1: Update the LifeCam drivers in Device Manager
  1. Open Device Manager.
    • In Windows Vista or Windows 7, click Start vistastartbutton.jpg, type devmgmt.msc in the Start Search box, and then press ENTER.

      securityshield.jpg If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
    • In Windows XP, click Start, click Run, type devmgmt.msc, and then click OK.
  2. Expand the following entries:
    • Sound, video , and game controllers
    • Imaging Devices
  3. Look for a black exclamation point (!) on a yellow field next to a device. The exclamation point indicates that the device has a problem. Right-click the device, and then click the option that corresponds to your version of Windows:
    • In Windows Vista, follow these steps:
      1. Click Update Driver Software.
      2. Click Browse my computer for driver software.
      3. Click Browse.
      4. In the Browse For Folder dialog box, move to the following folder and then click OK: C:\Program Files\Microsoft LifeCam\Driver32 If a driver is not found, try the following folders: C:\Windows\System32\Drivers C:\Windows\Inf
      5. Click Next.
    • In Windows XP, follow these steps:
      1. Click Update Driver.
      2. Click Install from a list or specific location (Advanced), and then click Next.
      3. Click to select the Include this location in the search check box, and then click Browse.
      4. In the Browse For Folder dialog box, move to the following folder and then click OK: C:\Program Files\Microsoft LifeCam\Driver32 If a driver is not found, try the following folders: C:\Windows\System32\Drivers C:\Windows\Inf
      5. Click Next.

Method 2: Download and install the latest software To download the most recent version of the LifeCam software, follow these steps:
  1. Visit the following Microsoft Hardware Web site: http://www.microsoft.com/hardware/downloads/default.mspx
  2. Click Software for Microsoft internet communications (webcam and headset) products.
  3. In the Select type of product box, select Webcams.
  4. In the Select your product box, select your LifeCam product.
  5. In the Select your operating system box, select your version of Windows.
  6. In the Select your operating system language box, select your Windows language.
  7. Click Go.
  8. Click the link to download the most recent version of the LifeCam software.
Courtesy Microsoft.com

Jul 15, 2011 | Microsoft LifeCam VX-1000 Webcam

1 Answer

Hi, My computer does not detect my CD PCL-350KM webcam with headset. What can I do?


This problem can occur if:

(1) You previously installed a Logitech Webcam.
(2) The LifeCam drivers are installed incorrectly.

Solution:

Method 1: Update the LifeCam drivers in Device Manager
Open Device Manager.
In Windows Vista, click Start , type devmgmt.msc in the Start Search box, and then press ENTER.

If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
In Windows XP, click Start, click Run, type devmgmt.msc, and then click OK.
Expand the following entries:
Sound, video , and game controllers
Imaging Devices
Look for a black exclamation point (!) on a yellow field next to a device. The exclamation point indicates that the device has a problem. Right-click the device, and then click the option that corresponds to your version of Windows:
In Windows Vista, follow these steps:
Click Update Driver Software.
Click Browse my computer for driver software.
Click Browse.
In the Browse For Folder dialog box, move to the following folder and then click OK:
C:\Program Files\Microsoft LifeCam\Driver32
If a driver is not found, try the following folders:
C:\Windows\System32\Drivers
C:\Windows\Inf
Click Next.
In Windows XP, follow these steps:
Click Update Driver.
Click Install from a list or specific location (Advanced), and then click Next.
Click to select the Include this location in the search check box, and then click Browse.
In the Browse For Folder dialog box, move to the following folder and then click OK:
C:\Program Files\Microsoft LifeCam\Driver32
If a driver is not found, try the following folders:
C:\Windows\System32\Drivers
C:\Windows\Inf
Click Next.

Method 2: Download and install the latest software
To download the most recent version of the LifeCam software, follow these steps:
Visit the following Microsoft Hardware Web site:
http://www.microsoft.com/hardware/downlo...
Click Software for Microsoft internet communications (webcam and headset) products.
In the Select type of product box, select Webcams.
In the Select your product box, select your LifeCam product.
In the Select your operating system box, select your version of Windows.
In the Select your operating system language box, select your Windows language.
Click Go.
Click the link to download the most recent version of the LifeCam software.
Microsoft knowledge bank.

Mar 14, 2011 | Cameras

2 Answers

How to install my microsoft lifecam vx 1000


  1. Place the product installation CD in the CD drive of your computer. The installation wizard will start automatically. Follow the installation wizard prompts.
  2. Plug the USB connector at the end of the LifeCam VX-1000 connection cable into an available USB port on your computer when prompted.
  3. Place the LifeCam VX-1000 on a flat, level surface, or hang it from your computer's monitor. Continue following the wizard prompts until the installation wizard finishes.
  4. Step 4 Click the "Start" button, then click "All Programs" on the Start menu.
  5. Click the "Microsoft LifeCam" folder icon in the list of programs on the Start menu, then click the "LifeCam" icon. That opens the LifeCam VX 1000 software and completes the installation process.
jQuery('.article ol .image').each(function(i,e){ var $this = jQuery(this); $this.find('img').error(function(){ jQuery(this).remove(); $this.remove(); }); });

Feb 28, 2010 | Microsoft LifeCam VX-1000 Webcam

1 Answer

Doesn`t work all the time and makes a whirring noise, do i need to buy a new cd/dvd drive?


Before you beginTo determine if the CD or DVD drive displays on the My Computer screen, follow the steps below.
  1. Turn on the computer and remove any discs from the CD/DVD drive.
  2. In Windows 98 and Me, double-click the My Computer icon on the desktop. In Windows XP, click Start and then My Computer .
  3. A CD/DVD drive icon displays on the My Computer screen when Windows recognizes the drive. If Windows recognizes the drive, find and use a section below that pertains to the CD-writing software with the issue.
  4. If the drive does not display on the My Computer screen, go to the Microsoft support website and search for documents on missing CD DVD drive .
RecordNow by Veritas/HP/Sonic does not recognize the CDRW or DVD+RW driveIf RecordNow does not recognize the CDRW or DVD+RW drive, follow the steps below.
NOTE: Install any updates for the RecordNow engine available on the Sonic support web site (in English). Step 1: Uninstalling RecordNowTo uninstall RecordNow to reset the software and cause it to look for the CDRW or DVD+RW drive again, follow the steps below.
NOTE: The steps below pertain to Windows XP.
  1. Click Start and then Control Panel .
  2. Double-click Add or Remove Programs .
  3. Select Record Now and then click Add/Remove .
  4. Follow the on-screen instructions until the uninstaller finishes.
  5. Select DirectCD and then click Add/Remove .
  6. Follow the on-screen instructions until the uninstaller finishes.
  7. Remove any discs from the drives and restart the computer.
Step 2: Installing RecordNow using Application RecoveryAfter Windows restarts, install the RecordNow software to begin creating CDs.To install the RecordNow software, follow the steps below.
  1. Click Start , All Programs , HP Tools or Compaq Tools , and then Application Recovery .
  2. Click Application Installation and then click Next .
  3. Select HP Record Now or Sonic RecordNow! and then click Install .
  4. The installation automatically installs all files. Follow the on-screen instructions.
  5. Restart the computer after the installation completes.
The HP Record Now or Sonic RecordNow! software should now recognize the CDRW drive. Back to topRoxio (Adaptec's) Easy CD Creator does not detect the CDRW driveEasy CD Creator produces an error message when it is unable to detect the drive, such as: There are currently no supported CD Recorders available...To prevent these errors from occurring, follow the steps below.
NOTE: Windows XP is not compatible with Easy CD Creator 4 and earlier. If the HP Pavilion computer was updated to Windows XP from Windows 98 or Me, use the native CD writing ability in Windows XP or purchase and install CD writing software that is compatible. Step 1: Installing updates for Roxio (Adaptec) Recording Software If the recording software is from Roxio (formerly Adaptec), go to the Roxio software updates page (in English) to obtain any software updates that are available for Easy CD Creator (with or without CD Copier or Direct CD). If Roxio still does not detect the CDRW drive after installing the updates, continue to the next step. Step 2: Changing the CD drive letter back, if it changedUpgrading to Windows 98 or Windows Me can change the drive letter to a different letter and make the drive undetectable to Easy CD Creator. To change the drive letter back to F or another previously designated letter, follow the steps below.
  1. Right-click the My Computer icon on the desktop.
  2. Click Properties . The System Properties window opens.
  3. Click the Device Manager tab.
  4. Click the plus sign next to CD-ROM .
  5. Double-click the CD-ROM name and then click the Settings tab.
  6. Under Reserved drive letters , select M (or the previously assigned letter) from the drop-down list. Be sure that both the Start drive letter and the End drive letter are the same.
  7. Click OK , Close , and then Yes .
  8. Restart the computer. If Easy CD Creator continues to fail to recognize the CDRW drive, continue to the next step.
Step 3: Uninstalling Easy CD CreatorIf the above steps fail to make Easy CD Creator recognize the CDRW, recover Easy CD Creator by uninstalling it. Recovering Easy CD Creator resets the software and causes it to look for the CDRW drive again. Be sure that you have the last recovery disc of your Pavilion recovery disc set before continuing.uninstall Easy CD Creator, Step 4: Installing Easy CD Creator using Application Recovery

Jan 17, 2010 | HP Pavilion dv6000z Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...