Question about Electric Demolition Jackhammer

1 Answer

Kango 950k can you help with my problem please, It work well with the drilling only less power with the hammering. I don't want to put it apart and break it.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

It sounds like it needs service,service is taking lower unit apart cleaning and regrease with special kango grease, if unit was serviced recently or not used much, grease could be real old and dry,sometimes you have to warm up unit before they start hitting correctly,,also if used a lot could be dirt build up,inside bit holder.remove bit holder clean out dirt regrease with heavy bearing grease,just grease the lower part,not very much grease is needed

Posted on Oct 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i change the sds chuck to the standard chuck on an kango 220k hammer drill


do not think that is an option . get another drill with standard chuck .

Oct 05, 2015 | Hammer Drills

1 Answer

Re assemble kango 501 drill


Contact sales@oasistools.co.uk

Jan 09, 2014 | Hammering

2 Answers

Need diagram for kango 900 concrete hammer drill


Hi Vicki
Is it the old all silver one or the new one with the red motor housing?

May 19, 2012 | Milwaukee Tool Hammering

2 Answers

Need Parts List And Service Guide For Kango 990/950 Breaker


If these are the original Kango kangos then you are out of luck. They have been obsolete for many years now and no parts have been manufactured for a long time. The name was bought by DeWalt and they didn't do much with it. The Kango name is now ownd and used by Milwaukee, but there machines do differ alot from the originals. There were a few main models and the main mid sized breakers were the 900 (hammer only) and 950 (rotary hammer) There were a few facelift/variations of each (K, X and B I think) and they did use a couple of different sized seals/pistons/cylinders.
If it is one of the Milwaukee models you can look up diagrams here...
http://www.milwaukeetool.com/

Apr 24, 2012 | Hammering

1 Answer

Schematic diagram of kango 501


Hammering problems are usually caused by worn o-rings and there are a number of them. If you're not familiar with hammer's insides, you probably want to take it to a service center and have them put a service kit in. Or you can buy it too. And the service kit will come with a diagram. (Or ask them to print one out.)

If you do it yourself, remember, don't use too much grease.

Mar 09, 2012 | Hammering

1 Answer

I have a Kango hammer drill no: 950 No.Identification is 985148.I am looking for the shaft.(10 inch.long) with 2 gears , one a each end .Tanks\r\nYvon


Here is a link. Contact these people. Kango was owned by Milwaukee but you can't get parts from the US anymore. I had to get a part from these folks in the UK.

http://www.knighton-tools.co.uk/acatalog/copy_of_copy_of_Milwaukee.html

Jul 06, 2011 | Electric Drills

2 Answers

Schematic diagram of kango breaker 900x


The 900 is a hammer only, the 950 is a hammer drill. the newer ones 950s used spline bits. Unfortunately new parts are no longer available for these great machines. What is your problem.

May 20, 2010 | Hobby Drill

3 Answers

Is there any maintenance I can do on a Kango 950 Jack hammer


Ureythn GE00 is madr by Fuchs in Germany - see their website.
Darina is made by Shell - see internet for comparable grease

Apr 21, 2009 | Hammering

2 Answers

LOOKING FOR A MANUAL & INFO


Milwaukee now owns Kango, unfortunately I believe the 950sv is the old style. Parts are no longer avail. I have about 20 of the breakers. It is really too bad, they were great machines.

Jan 15, 2009 | Electric Demolition Jackhammer

Not finding what you are looking for?
Electric Demolition Jackhammer Logo

1,839 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Hammering Experts

John Trevino

Level 3 Expert

1388 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1926 Answers

PHiBrOpTK

Level 1 Expert

20 Answers

Are you an Electric Hammering Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...