Question about Kenmore 72055 Air Conditioner

1 Answer

I lost the paper behind the nobs and I dont know what the different switch spots represent

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 117 Answers

Just turn the unit on and check the functions. You should have high and low fan only settings, off , then high and low cool settings

Posted on Jul 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I saw your answer to a question about a fuel pump reset switch being in the trunk of a Toyota Camry? Is there really one there, because nobody else seems to know this! Thanks!


Yes, there is a fuel reset switch but may not be in the trunk. Refer to your manual. Mine are located in different spots. One of them is in the back on the side behind a concealment panel. The others are behind the kick panel on the passenger side.

Jan 07, 2016 | Toyota Cars & Trucks

1 Answer

Dishwasher keeps running


That is a indication of a bad timer the timer is the nob that u turn to make it run drop door down take off the top six screws on the door from the inside then pull off the knob then there will be two screws behind nob and the time should come right out then once u get the new time pull off wires one by one to make sure u putt when in the same place

Jan 16, 2014 | GE Dishwashers

1 Answer

Door jamb switch


all doors there are drivers, and then OTHERS, (wiring)
its wired OR logic, so any switch grounds, it turns them on.
and is programmable on all cars. to have this on or off (features explained in the operators guide, lost that?)

CRV has 3 lamps
front dome
rear dome
and spots.
all of them are messed up? for all doors.
if yes, ITS programming. is wrong.

the rear light is directly controlled lamp to rear lamp. (hatch glass or gate switches.
and has a slide switch, off,on, auto.
the spots lamps are direct. on, or off
the front however is totally different and wired unique.
as you know the drivers door is unique, as it operates the
keys left in igntion, or head lights left on, mode. so if those work
right then the drivers door switch, is,, working......
the front dome
has 3 modes. again , off , on and auto .
Auto is the MCU , unit, the MCU sees any door open and the front dome gets input to the AUTO pin, and if in auto the lamp glows.
i dont think the MCU is programmable but do read the oper guide for that., i dont have one.

Jul 30, 2013 | 2006 Honda CR-V LX

1 Answer

Hotpoint ew91 halogen hob wont turn off


the control may have shorted. replace control(behind the knob).

Sep 10, 2012 | Hotpoint Ovens

1 Answer

Lost my charger for my vector sport spot 1,000,000 power series


My spot light just crapped out, dead battery.
I have a wall chargerand car charger available along with the on/off switch and bulb. contact me dspiper@comcast.net

Jul 25, 2012 | Vector 1 Million Rechargeable Spotlight

1 Answer

I have lost manual and i dont know how to use it.


I have lost manual and i don't know how to use it.

May 21, 2010 | Bissell 12005 Spot Bot Handheld Vacuum

1 Answer

2002 Ford F-250 crew cab will not switch into 4WD


The switches are problematic on any vehicle that has automatic locking hubs. Your issue seems to be that the switch has gone bad behind the selector knob for the 4 wheel drive. I would pull the selector knob off and check for proper wire connection and make sure that there is no deposit on the terminals.

Jan 02, 2010 | Ford F-250 Cars & Trucks

1 Answer

04 Wrangler AC fan only works on high speed (position4).


Its the switch behind the fan nob thats not making contact, you have to pop the cover off the dash where the radio fan and other gizmos are. Then remove the fan nobs by pulling them straight off after that unscrew the housing unit inside is the switch. You must carefully pry this open so as not to break the plastic clips holding it together the switch thats fryed should just pop out easy replacement fan switch! If my mind serves me right it costs 40$ to replace if you order from chrysler.

Aug 27, 2009 | 1999 Jeep Wrangler

1 Answer

Nobs and switches


I couldn't find any online information. I checked with pyramid. This was their response:

The owners manual is free of charge please send us a request along with a self addressed stamped envelope to the address below:
Pyramid Service Center
1600 63rd Street
Brooklyn, NY 11204

Nov 04, 2007 | Pyramid PB448 Car Audio Amplifier

Not finding what you are looking for?
Kenmore 72055 Air Conditioner Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Heating & Cooling Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a Kenmore Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...