How to remove error E8 in printer laserjet 1136 mpf

Watch the video at the YouTube link. error e8 on laserjet printer M1132 MFP

Juliet. Most likely the scanner lamp, or scanner control unit assembly is defective. If you're technically savvy, you could remove the scan glass and lube the shaft that the scan lamp assy slides on. Sometimes that will fix it. Otherwise, the whole top scan unit will need replacing. That could cost over $300 for the replacement.

From the manual E7 indicates "A fatal error has occurred from which the unit cannot recover.
Turn power off/unplug. Wait 30 seconds, then plug in/turn on. Allow unit to initialize. If problem persists, contact HP customer support"

try this
E6

E7

E8

E9 The product has experienced a fatal error from which it cannot recover.

1. Turn off the product or disconnect the power cord from the product.
2. Wait 30 seconds, and then turn on the product or reconnect the power cord to the product.
3. Wait for the product to initialize.

If the error persists, contact HP customer support.

See this... http://h30434.www3.hp.com/t5/Other-Printing-Questions/m1132-hp-printer-gives-me-e8-error-code-is-it-expensive-too/td-p/907661

This error typically means that the Size of paper defined in the print job being sent from the application does not match the size of the paper the printer has set for the MPF. (in this printer, MPF = Manual Feed)
For example: If you send a Letter size job to the printer from, lets say MS-Word, but the printer currently has Legal size paper assigned in the MPF, this error will result.

Change the Windows printer to default settings

There is an access door in the back of the printer. Open the door and you should see jammed paper. If not then you have a faulty sensor or switch.

I have a problem in my hp laserjet M1136 ie. show a E8 error , how can i remove it..

I have face a problem in laserjet m1136 i.e. show a e8 error .how can i free it or remove it..