Vipros queen electric diagram european model - Dryers

Question edited for clarity and toss in some CAPS.
Duplicate question deleted. Refresh page to see your question.

Here is the Service Manual with wiring diagrams. It helps to have model numbers in questions like this as 'Speed Queen' is a range.

https://www.groupdynamics-laundry.com/mans_files/5/36793.pdf

..

It is likely to be one of the thermal fuses. You can check them with a multimeter for continuity.

https://www.google.com/search?q=Speed+Queen+ADE3SRGS173TW01+parts

Speed Queen wiring. Nothing specific to the model.

https://www.google.com/search?q=Speed+Queen+wiring+diagram

..

If its a standard top loader there should be a cap you can pry off on top of agitator. Screw or bolt is under cap.

Hi, If you have a gas dryer.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer not Working Gas Dryer Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer is electric..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer Troubleshooting Electric Dryer won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

just had the same problem with my husy 357xp all i done was push the kog back onto the handle and pull the handle back to release the brke and fit cover back on with no other problems. If this does not work a pair of pliers or grips and turn the kog by hand this is very hard but can be done hope this helps 

http://www.filterqueen.com/contact-filterqueen-locate-distributor.html they will help you.

I can not find a diagram using your model number.
However, most Speed Quenn dryers have 2 screws on the bottom right and left sides of the front panel.
Unplug the dryer.
Remove the 2 screws.
Lift the panel forward and disconnect the door switch wires.
Reemove the belt and drum to access the heater circuit.

what model majestic?