Question about Kitchen Ranges

1 Answer

Light flashing door locked

Cooking my TURKEY and a light came on door locked the model number is PLGF389CCB what can i do??????????????? HELP FAST

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 126 Answers
Re: light flashing door locked

Shut power off take back off . find lock mech. undo door will open

Posted on Nov 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

While cooking a turkey the oven reached the heat setting and the turkey was placed in to cook two hours. After two hours when the turkey was removed the heat was off and the turkey had not cooked. ...

next time send the model number so i csn look up your machine,open the bottom draw and on the frame you'll see a tag with the model and serial numbers,all i would need is the model,anyway you must have a computer board in the clock assy. and sometimes just like your house computer has to be restarted because for some reason the computer froze and shutting down the power will reset it,if this keeps happening you'll have to change out the clock assy.but i've seen this happen,the first thing i do when i go in on a job and the machine has a computer board in it is to unplug it for 5 minutes to see if it resets and usually it doesn't happen again unless the power went out or something like that,keep an eye on it you should be fine but if it happens again soon for no reason like i say you might have to change out the clock assy.good luck any more problems i'd be happy to help.

Apr 10, 2011 | Whirlpool Electric Range

1 Answer

Maytag, advanced cooking system , super capacity, error code f9

A model number would help, but an F-9 code is usually followed by a 1, 2 or 3.
F-9-1 is the board is not seeing the door lock
F-9-2 is the board not seeing the door unlock
F-9-3 is the board seeing both inputs and not knowing the condition of the door lock.

The problem is like caused by a failed switch in the door lock mechanism. This normally requires the replacement of the door lock assembly.

Nov 22, 2010 | Maytag Kitchen Ranges

1 Answer

How do I set the oven to self clean

The oven door must be closed and all controls set correctly for the cycle to work properly. After a Clean Cycle You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. If white spots remain, remove them with a soap- filled scouring pad and rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle. If the oven is not clean after one clean cycle, repeat the cycle.
You cannot set the oven for cooking until
the oven is cool enough for the door to unlock.
While the oven is self-cleaning, you can
touch the TIMER/CLOCK pad to display the time of day.
To return to the clean
countdown, touch the COOKING TIME pad.
If the shelves become hard to slide,
apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

Using the self-cleaning oven.

How to Delay the Start of Cleaning

Make sure the clock shows the correct time of day. If your model has a latch, latch the door. Touch the SELF CLEAN pad. Using the + or or the number pads, enter the desired clean time. Touch the DELAY START pad. The earliest start time you can set will appear in the display. Using the + or or the number pads, enter the time of day you want the clean cycle to start. Touch the START pad. On models without a door latch, the door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off. The oven shuts off automatically when the clean cycle is complete. When the LOCKED DOOR light is off, slide the latch handle to the left as far as it will go and open the door. If your range does not have a latch, the door will unlock automatically. n The words LOCK DOOR will flash and the oven control will signal if you set the clean cycle and forget to close the oven door or forget to latch the door on models with a latch. n To stop a clean cycle, touch the CLEAR/OFF pad. When the LOCKED DOOR light goes off indicating the oven has cooled below the locking temperature, unlatch the door (on models with a latch) and open the door.

Oct 17, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

I accidently put the lock on my oven.Now the lock will not come off. Please help


The oven door and controls can be locked to avoid unintended use of the oven. The oven doors and controls cannot be locked if the oven is in use, or the oven temperature is 400°F (205°C) or above.

To lock the control panel and both oven doors:

  1. Press and release Cancel.
  2. Press and hold upper oven Cancel and Cook & Hold for 3 seconds. “Off” appears in the display and “Lock” flashes while the controls and oven doors lock. Both oven doors lock. “Lock” remains lit in the display.
To unlock the control panel and both oven doors:

Press and hold upper oven Cancel and Cook & Hold for 3 seconds. “Off” disappears from the display and “Lock” flashes while the controls and oven doors unlock.

Please see this link for more information as how to disengage the lock on your Jenn Air Oven---

Door Lock On Oven

Please do rate this solution as FixYa and revert for further assistance.


Apr 21, 2009 | Jenn-Air SVE47100 Slide-In Electric...

1 Answer

1. Product is a used G.E. Stove. 2. It has a self-cleaning oven. 3. It has an oven control knob with the following features that go clockwise according to these. a. preheat b. warm c. temperatures d....

Check the clock timer you may have programed a clean start time into it. Also can you give the model number it is on the door edge or near by the door when open. Let me know if that worked

Dec 21, 2008 | Kitchen Ranges

1 Answer

Cancelled self-clean, F9 code came up, door lock light flashing, can't use oven

your model number confirms that your range was manufactured by WCI (Frigidaire). although this doesn't help you now, it may help if parts are needed.

now, there is an indepth guide online to fixing this common problem and I would like you to go through it and see if it helps you solve your problem.

If you have found this site previously then I apologise, if you still need help, by all means post again and someone more qualified may help.

Hope this is of use to you ;)


Oct 25, 2008 | Kitchen Ranges

1 Answer

Jenn-air shut off while cooking giving f9 code

code F9 keeps flashing when I attempt to turn on my oven. What does this mean?

Sep 03, 2008 | Jenn-Air JES9800A Electric Kitchen Range

1 Answer

Help! Trying to speedbake my turkey!! Lost instructions!

you are better off cooking normally unless you want a dried out turkey. besides cook times vary with every range get to know your stove

Nov 22, 2007 | Frigidaire FEF366 Electric Kitchen Range

1 Answer

Cannot figure out how to make oven work

Hi, try this and see if will help you. Most of the Gemini models are the same.

To set Bake:
1. Press the Bake pad.
• BAKE will flash.
• 000 will flash in the display.
2. Select the oven temperature. Press the
Autoset 0 pad for 350° F or the appropriate
number pads.
• Each additional press of the Autoset 0 pad will increase
the temperature by 25 degrees.
• The oven temperature can be set from 170° to 550°.
3. Press Bake pad again or wait four seconds.
• BAKE will stop flashing and light in the display.

Nov 20, 2007 | Maytag MER5775Q Electric Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Barrett Palumbo
Barrett Palumbo

Level 2 Expert

1772 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides