Ai have a 1965 zenith console everything works but the phonograph so, i would like to get another phonograph that is compatible how would i do that ?

As this is a very old unit, there may be dozens of mechanical reasons for this. For more information, please visit my website at audioserviceclinic.com. Thank you.

The label has likely been removed or come off, most of those had it on the rear or bottom with a few inside where the phono is.

Model # IS 4070
AM/FM Stereo Receiver
With Phonograph and Cassette Play/Record
Serial # W288209
Power Source AC 120 V 60 Hz
78 Watts 0.65 Amps
Unswitched
AC 120V 60 Hz
200 W Max

Model # IS 4070
AM/FM Stereo Receiver
With Phonograph and Cassette Play/Record
Serial # W288209
Power Source AC 120 V 60 Hz
78 Watts 0.65 Amps
Unswitched
AC 120V 60 Hz
200 W Max

i dont think so your model number say thats not an hd tv the maximum resolution is the same as a normal tv so mean 4:3 format.....
if you got a warped picture thats mean you youu have an sync problem or so that is difficult to
say from here..
have a nice day,hoping that will hell you

All I can suggest is to go backwards through what you did. Look for the part that seems wrong or out of place. It could be something as simple as a mounting or bolt in the wrong place. Or even something fitted the wrong way around.

I have the same model with the 8 track player, original manual, and original receipt dated 1975.

I assume you mean the t-table turns with unsteady speed (?)
Or do you mean the t-table is bent, edge moves up and down in relation to the frame.
If speed is unsteady, have unit completely cleaned and lubricated and replace idler wheel

Is your needle tight.  It has to be tight for it to work