After you put it back up, hold the test button in so you hear three beeps, three times. Or remove it from the base plate and put it back.
If that doesn’t work, call Vivint and have them walk you through removing and re-adding it back into the system.
Alternatively they might need to send a Technician
Try to change the battery on the system its self.
SOURCE: smoke alarm/carbon monoxide detector
I have a First Alert Smoke Detector Model SA 86RAC.When I changed the Battery today it beeps.How do I fix this problem?
SOURCE: 1996 Toyota Celica remote security system no longer works
Hi, Contact your dealer and get instructions for reprogramming your remotes. When a security system loses power for an extended amount of time the programming for the remotes are lost.
SOURCE: We have smoke detectors that are hooked up to
when you replaced the batteries it may unprogramed
SOURCE: smoke detector won't stop chirping.
it may need to be cleaned or it is bad may need to be replaced
SOURCE: my smoke/carbon monoxide detector keeps
My Smotec 3786A indicates not to install it in above 85% humidity.
One of my three seems to go off annually or so and this is what
recently put it down to. I was making an espresso coffee on the
stove and it generates a lot of steam and off goes the fire alarm.
I did change the battery to no avail.
349 views
Usually answered in minutes!
×