Manual Harmony 4052 Janome sewing machine - Janome Sewing Machines

Search for:

"sewing machine timing"

...

Install a brand new needle. If it still does not pull up the bobbin thread, then the machine is probably out of time. Search for sewing machine timing or take it for service.

Some helpful information may be found here:

janome harmony 4052 buttonhole Google Search

...

try this link you might find the manual.
https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=janome%20harmony%204052%20sewing%20machine%20manual

check with janome customer service for a manual

Be careful if you have a two piece body machine because once you have taken screws out of the back there are plastic lugs on the inside of the casing that you have to locate, my advice is to oil all the parts that you can see or take it to a sewing machine shop

The ziz-zag wdith regulartor might be switched off. try turning the knob. I hope this helps :)

go to the website & check with the sewvacdoctor.com

You can get the manual on the link below.

http://www.managemylife.com/mmh/owner_manuals/18625/KENMORE-Mechanical-Sewing-L0306431?brand_name_search=385.4052

Good Luck please rate 4 thumbs up and please leave a testimonial

I've always been able to get a free PDF downloadable manual from Janome. They are happy to send you a manual for your specific machine via email, and they've always been very helpful to me. Here's a link to them:

http://www.janome.com/index.cfm/ContactUs/Machine_Support

Hope this helps!