Question about Kirby Vacuums
No you will suck water into the motor, you must use a shampooer tray.
Posted on Aug 24, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1. Raise the vacuum head all of the way up. 2. Remove the vacuum head by removing the belt and releasing it. 3. Place the shampooer head on the vacuum by securing the clamp and them put the belt on 4. Take the bag off of the vacuum by twisting at the base just slightly outward and lifting upwards and unclamp it from the handle 5. Put water and cleaner into the water resevoir. 6. Put the reservoir on to the kirby where the bag was by holding it parallel to the vacuum then using both hands, twist it outward slowly until it goes down onto the unit then twist back to parallel position. 7. Put the coil looking piece on the shampooer head on top where the hole is...it will only fit one way successfully. 8. Put the other end on the under side of the water reservoir. 9. Lower the shampooer head all of the way down on the carpet just like you would the vacuum head 10. Turn on the vacuum and reach down and turn the knob at the top of the reservoir, this will begin putting cleaner (tons of foam) onto the carpet. Just work in 3' x 3' sections, turning off the foam intermitently until you are finished. I hope this helps.
Posted on Sep 03, 2007
Please follw this link to view my carpet shampooing guide. Hope it is helpful!! :0) Marci
Please follw this link to view my carpet shampooing guide. Hope it is helpful!! :0)
Posted on Oct 23, 2007
SOURCE: shampooer instructions
Here's my online guide for using the Kirby shampooer.... HOPE IT HELPS!! Marci
Here's my online guide for using the Kirby shampooer....
HOPE IT HELPS!!
Posted on Oct 23, 2007
You need to check that the little round screen is in the hole where the hose attaches to the shampoo tank. My guess is that the little round screen is wedged sideways in the end of the hose.
Posted on Jun 28, 2009
Tips for a great answer:
on Mar 21, 2010 | Kirby G5 Bagged Upright Vacuum
May 15, 2009 | Kirby Ultimate G Bagged Upright Vacuum
Nov 17, 2008 | Kirby Ultimate G Bagged Upright Vacuum
Nov 14, 2008 | Kirby Vacuums
51 people viewed this question
Usually answered in minutes!