I have a Keurig K150 that displays system overheating. What can I do. Is it repairable?

That unit uses air pressure to move the water. When no water is transferred to the heater, the unit stops. This could be an issue with the water reservoir or the pump. Since you did not post the model number it is not possible to advise you further .

Keurig Platinum Reset for the Not Ready Light - YouTube

? 1:21
https://www.youtube.com/watch?v=xjWIQpttTc8
Jun 22, 2010 - Uploaded by Lsailor1
This is a reset method for using on the Keurig Platinum B77 coffee ... Show more ... set to brew in morning ...Missing: v1255

Fix Keurig Vue V700 Not Brew

Hi there
I assume that you have checked all connections and cables. Look at the troubleshooting pages to see if this problem is solved there.
If not then there is to restart the machine. Unplug the coffee maker and allow it to rest for a few minutes. Then try again. If this doesn't work work look, there might be a valve that needs replacing or an electrician might need to look at it.
hope for the best
kolbrun

The board is now confused and needs to reset to factory specs. I suggest calling 1-866-901-2739 for help resetting the control system.

Theram breaker is defective.

Hi,

Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.

Keurig CoffeeBrewer not making a full cup of Coffee
heatman101

..,,./';
'

Hi,

Here are a couple of tips that I wrote that tell you how to troubleshoot a Torpedo or Reddy heater...

Reddy Heater - Troubleshooting Torpedo Heaters

Torpedo Heater Pump Pressure Adjustment

heatman101

Get the manual there, they will find you every Technics handbook.

Jabswap- describe the physical charactoristics of the exixting ignitor.
IE: shape, wire color, etc.

dont have original remote anymore what do I do