Question about Samsung Televison & Video
TV went black the other day, still has sound, did the flashlight test and when I press menu on the control I can read the functions, I did not see any backlight in the back, any idea if its the T-con board or the PowerBoard ?
There is three possibilities:
1. Defective back lights LED strip.
2. Defective LED driver section integrated in the main power supply.
3. the main board.
How to check it:
1. You need a LED back lights tester to check the strips, or open the panel, use a 3.7 V DC power supply to test each LED diode separately.
2. Use a multi meter to test the out put DC voltage from the connector to the LED strip between the + & - for each section, (like 1+/1-, 2+/2- etc.) it should read 140 - 220 V DC. (need power up the TV).
3. Un-plug the cable between the main board & the power supply, power up the TV, if you get the back lights light up, the main board is bad.
Posted on Aug 11, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Jimmy shop.ccom has T-con board part #T500HVD0.0 500t10-C02 at the bottom in the description it list model PLDED5030A CRk my model is PLDED5066A-E since the parts # the same will it work in my tv?
If you see an image with a flashlight the T con board and power supply board are good. The back light controller board is the culprit.
Posted on Dec 18, 2015
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Posted on Mar 31, 2016
Stop the bleeding and replace the TV, you will end up spending more on repairs that the cost of a new flat screen, have you checked prices of late? A 46" Vizio 4K for $378.00
Posted on Sep 02, 2016
Testimonial: "The TV is only a year old..."
Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
Posted on Oct 08, 2016
Tips for a great answer:
Apr 08, 2018 | Samsung Televison & Video
Mar 13, 2018 | Televison & Video
Aug 29, 2016 | Samsung Televison & Video
May 27, 2016 | Samsung Televison & Video
Apr 04, 2016 | Samsung Televison & Video
Mar 13, 2016 | Samsung LN40B610 LCD TV
Oct 15, 2015 | Samsung 40" 1080p 120Hz Slim LED Smart TV...
May 16, 2008 | Samsung Televison & Video
Jun 18, 2018 | Samsung Televison & Video
92 people viewed this question
Usually answered in minutes!