Do you have a huskylock530 foot for overlocker if so do you send to australia and how much please

Is this any help?

Manipulating the tensions on a serger creates the different stitches. Therefore, it depends what stitch you want to make that determines how you set the tensions. For a basic 4-thread overlock, usually setting the tensions at the midway point is standard, however, some tweaking of each may be required to get them balanced. What helps is to thread with four different colors making it easier to see which thread's tension needs adjustment.

The Anatomy of The Best Serger Tension My Tips Bonus Unpick it Serger...

How to Adjust Thread Tension on an Overlocker Singer Australia

You can download the Bernina serger workbooks that may help you set up your machine for specific overlocker stitches:

Bernina Mastery Workbooks

Try this site or search the internet for:
Toyota 6600 presser foot

Presser Foot Toyota White 11932

...

sounds like there is a short in the wiring and the machine need
to be checked

If you are asking where to buy a foot pedal for the 134DL you can contact [email protected] and I'm sure he can send you one.

i have a manual for this machine

If you want the bottom of the T to look like RTW with the double row of stitching, you cannot do this on a serger.

You can achieve the effect by using a twin needle, two spools of thread, bobbin and a straight stitch.

Make sure the double/twin needle will pass through the presser foot and opening in the needle plate below the presser foot.

Practice on a double layer of a scrap of the T shirt material as the tension may need to be slightly looser than the normal setting.

You can find free manuals to down load from singer ..

http://www.singerco.com/accessories/manuals.html

Please vote !!

Hi,

Janome can supply them - here in Australia they sell for  approx $16.

Cheers