Question about Lands Phones
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It's easier and more stable to program a button for FLASH (F03). The timing is in program 107 and sets to about 18-20 for 450 to 500 milliseconds.
Posted on Jan 27, 2009
This is done on extension 10 or 11
Press Feature 00, Left Intercom, Left Intercom, #209
At the line prompt enter a line number for the pattern
At the pattern prompt enter a pattern number 1 through 8. (1 is a default)
#209 to program next line
Feature 00 to exit programming
Posted on Jul 10, 2009
Depending on the type of voicemail you have, That's done by pressing your voicemail key or intercom 777. If you have a Partnermail VS the admin mailbox is 99 with the default password of 1234.If you mave a Partner Messaging System the admin mailbox is 0 with a default password of 1234 or 123456. Once your into the admin mailbox press 9 for admin programming.
Posted on Oct 06, 2009
Tips for a great answer:
The green lights next to the line or pool buttons show the current Line Ringing settings for all
lines or pools assigned to the extension. (If a line or pool is not assigned to a button, the green
light next to that button is off.) The following ringing options can be shown by the green light
next to the line or pool button:
? Immediate Ring - on steady
? Delayed Ring - flashes slowly
? No Ring - flutters quickly
3) Press the line or pool button until the button light shows the correct setting (the setting for the
currently selected line or pool also appears on the display).
4) Continue programming, or exit programming mode.
For incoming calls, the line selection (hunt sequence) is set by the local service provider). For outgoing calls....again....it depends on the system. For the Partner ACS:
1) Press FEAURE 00, SYSTEM PROG, SYSTEM PROG, CENTRAL PROG at extension 10 or 11.
2) Enter the number of the extension to be programmed for Automatic Line Selection.
3) Press **.
4) Press the line, pool, or INTERCOM buttons in the desired order. The valid entries for Automatic
Line Selection depend upon the type of extension:
? Key Extension: Outside system lines, Left Intercom (the factory setting)
? Pooled Extension: Pool 880 button 1, button 2, Left Intercom, Right Intercom (the factory
setting), Pools 881-883, individual lines
For each button pressed, a display similar to the following appears:
Automatic Line Selection
5) To exit Automatic Line Selection, press **.
6) Press CENTRAL PROG and enter a new extension number, or exit programming mode.
Changing line ringing and line selection are tasks that are normally reserved for the Administrator of the telephone system.
Jan 06, 2011 | Lucent 18D Corded Phone
Dec 18, 2009 | Comdial Avaya Partner ACS Phone
Dec 11, 2009 | Comdial Avaya Partner ACS Phone
Oct 13, 2009 | AT&T Partner 18 Phone (315805B)
Oct 06, 2009 | Lands Phones
Aug 05, 2009 | Avaya Partner ACS 308EC (108463001)...
Jan 26, 2009 | Avaya Corded Phone avaparp18d
Dec 31, 2008 | Avaya Partner ACS 308EC (108463001)...
Nov 12, 2007 | Lucent PARTNER18 Corded Phone
33 people viewed this question
Usually answered in minutes!