Question about Dishwashers

Open Question

Hi - my Quiet Series dishwasher won't turn on. I have re-set the circuit breaker but no luck. Racks seem to be in correct position. Your suggestions appreciated.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

catriver
  • 878 Answers

SOURCE: Dishwasher won't start

Kaclf, If you have no lights at all, dishwasher unresponsive, it's probably one of two things. First check the junction box where the cord hooks up to the dishwasher. Sometimes I find a bad connection in the wire-nut. Second, there is a thermal fuse that sits on the control board. You will have to remove the inside panel. You want to see if it's blown. It will be sitting on the top side of the board, two wires going to it. Catriver

Posted on Dec 30, 2007

  • 1 Answer

SOURCE: Maytag Quiet Series 300 Dishwasher will not turn off after it com

MY DISHWASHER KEEPS RUNNING, IT IS A WHIRLPOOL GOLD QUIET PARTNER IV

Posted on Apr 06, 2009

  • 1 Answer

SOURCE: Maytag Quiet Series 300 Legacy Series Dishwasher

Mine was doing the same thing and I just pressed and held down the heated dry button until the light went off. Then I was able to start my machine as usual. Hope this works for you.

Posted on Jul 02, 2009

StarGGundam2
  • 24 Answers

SOURCE: Maytag Quiet Series dishwasher won't start

Sounds like you have a bad Control Board

http://www.partstore.com/Part/Maytag/Maytag/MDB6600AWW/Maytag/Maytag/99003160/New.aspx

But with the price it cost, you might be better off buying a new dishwasher, preferably a different brand, cause that washer has some bad reviews

Posted on Oct 12, 2009

  • 2 Answers

SOURCE: 1.5 year old Maytag Legacy Series Quiet Series 300 Lock Light on

Hold down the heated-dry button for 3 seconds and the light will clear.

Posted on Dec 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

FILLS, DOES NOT WASH, THEN DRIES


GE GLDT690TBB Fully Integrated Dishwasher with 7 Wash Cycles Including SaniWash and SpeedWash, Nylon Racks, Stainless Steel Interior, Countdown Display and QuietPower 56 Quiet PackaBlack- Recent Questions, Troubleshooting & Support

Oct 07, 2015 | GE GLDT690TWW Fully Integrated Dishwasher...

1 Answer

My electrolux dishwasher model EWDW6505GS0 will not turn on. The electronic display only indicates "Welcome" for a split second and then goes out and nothing lights up on the panel and cannot get it to...


Good Afternoon Will, thank you for allowing me to assist you!

How long did you leave the breaker off? It is important to wait roughly ten minutes and then your dishwasher on. If resetting the power does not correct the issue, then it sounds like your dishwasher could possibly be experiencing a communication error with the control board/panel or a potential wiring failure. At this point, I would recommend having a service technician to diagnose the problem before investing in unnecessary parts.

Jan 11, 2014 | Electrolux EWDW6505GS Fully Integrated...

1 Answer

Electrolux esl 6226 not working beeping sound and light flashing


Hello Eamonn, I am happy to assist you!

Let's try resetting the dishwasher by either unplugging it or flipping the household circuit breaker to the off position. It is important to wait roughly ten minutes and then turn dishwasher back on. Confirm that the door is properly latched and try selecting a cycle. If resetting the power does not correct the issue, it could potentially mean a number of things: a potential wiring failure, faulty door latch assembly or control board. Because it could be a number of any one of several underlying causes, I would recommend contacting a professional to properly diagnose and repair the appliance.

Oct 12, 2013 | Electrolux EWDW6505GS Fully Integrated...

1 Answer

My Frigidaire electrolux dishwasher model # FDB2310LCC0 trips a pf code 40minutes into the cycle and it is not the circuit breaker. how do i correct this problem?


Good Morning Doria, thank you for allowing me to assist you!

Typically PF means power failure and you should be able to start a cycle. Unplug the unit or flip the household circuit breaker. Wait about ten minutes and then turn the unit back on. If the error code continues to display, I would suggest contacting a professional to accurately diagnose and repair it.

Best of luck!

Oct 07, 2013 | Electrolux Frigidaire Professional Series...

1 Answer

After power failure dishwasher only turns on eco wash. how do i get it to work on hi temp and other settings


Hello Lena, thank you for your inquiry! Let's try reprogramming the dishwasher by either unplugging it or flipping the household circuit breaker to the off position. It is important to wait roughly ten minutes and then turn dishwasher back on. Confirm that the door is properly latched and try selecting a cycle. If resetting the power does not correct the issue, it could potentially mean a number of things: a communication issue with the control board, a potentialwiring failure, or faulty door latch assembly. Because it could be a number of any one of several underlying causes, I would recommend contacting a professional to properly diagnose and repair the appliance.

Aug 06, 2013 | Frigidaire Professional Series 24 in....

1 Answer

My dishwasher the maytag quiet series 300, will not respond to the start button


Find your circuit breaker for your dishwasher and turn it off for 3-5 minutes. Turn it back on, then turn on your dishwasher. If this works, after the complete cycle of your dishwasher, you have to turn it off manually by pressing "on" botton then press it 1 more time to cancel; this will turn off. The defect is, probably the moisture built up in the control board causing it to ground some of the connections. Suggestion for the manufacturer, insulate the control board to prevent absorbing moisture.

Jan 04, 2013 | Maytag Dishwashers

1 Answer

Maytag mdbh945aww quiet series 200 dishwasher. can't get it to turn on. Any suggestions.


A circuit breaker may have tripped

The wash cycle control may be defective

The fill control valve may be defective

The door interlock may be defective

Sep 08, 2012 | Dishwashers

2 Answers

Maytag Quiet Series 300 Dishwasher will not turn off after it com


MY DISHWASHER KEEPS RUNNING, IT IS A WHIRLPOOL GOLD QUIET PARTNER IV

Apr 05, 2009 | Dishwashers

1 Answer

No power maytag quiet series mdb7600awq


Hi,

To my knowledge, there are no fuses in a Maytag MDB7600AWQ. Should you be interested, you can reference the electrical diagram here. Exploded diagrams and parts placement are here. Based on these probable causes of no power would be:
  • no supply from the outlet, circuit breakers have tripped;
  • any of the two (2) door switch is faulty/open;
  • defective controller board;
  • defective AC cord.
May I ask, have you tried resetting the circuit breakers?

Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.

Nov 22, 2008 | Maytag 24 in. MDB5651A Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Owen Barnes

Level 3 Expert

867 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...