Question about Kitchen Ranges

Open Question

Installing anti-tip bracket on range Model JCB630DKWW

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: anti-tip bracket for Amana ACF422GAW

thats the stupidist thing ive ever heard.

Get a propowe bracket, which goes around teh foot of the stove.

Posted on Oct 02, 2008

Ad
SolutionGuy
  • 331 Answers

SOURCE: oven anti-tip bracket

Hi Jodie,

The anti-tip kits are installed on the floor behind the oven. They're installed BEFORE the oven is moved into place. They are "U"-shaped and when the oven is slid into place, the "U" locks into the back legs of the oven to lock it down.

You can tell if yours is so equipped by simply sliding the oven out away from the wall about 10 inches then looking behind it on the floor. Slide the oven out by opening the door about 5" and place your hands inside... then lift and pull toward you at the same time.

Here is the anti-tip kit for yours... If you see this down there, then you're good to go. If not, order both of those parts (in the previous link) 'cause you'll need them.

Hope this helps!

SG


7cadd9b.jpg

Posted on Apr 22, 2009

jsrock516
  • 5911 Answers

SOURCE: Where and how to install

The anti tip bracket is installed along the baseboard area BEHIND the range, so that one of the rear feet on the appliance will slide into it when pushed against the wall. Once installed, the rear foot of the range is slid into the bracket, holding the rear foot to the floor. This effectively prevents the range from tipping forward.

Installation instructions are included on page 3 of the Installation Manual that came with the appliance. If you no longer have a copy, you can obtain a replacement at managemylife.com. Just enter your model number under their "Manuals" link and you will find it listed in .pdf (Adobe) format. You can download or print a copy for FREE. For your convenience, here's a direct link:

http://www.managemylife.com/mmh/installation_guides/3001/MAYTAG-Free-Standing-Electric-L0502644?brand_name_search=mer5775q

Figure 3 shows an excellent illustration of how the bracket is to be installed.

If you have any questions, please post back and let me know. I hope this helps you.

Posted on Oct 21, 2010

  • 34763 Answers

SOURCE: Need mounting bracket for GE Profile over range microwave model #JVM1190WY004. If not found discontinued, can anyone recommend a substitute or a secure means of installing this?

Fixya is not a buying service.

Posted on Nov 15, 2016

Testimonial: "wasn't ASKING to buy, asking for help."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1 of 2 bulbs in upper unit stopped working. I replaced the bulb 10W, 12v & both bulbs worked. Later, both bulbs stopped working. Both bulbs have continuity. New bulbs don't fix issue. Ideas??


Thermador Appliances ' Frequently Asked Questions ' Use ...

www.thermador.com/faq/categories.php?categoryid=53

ThermadorContact us for help with service & repair needs. ... The anti-tip bracket is not needed for 48" Harmony units. However, the anti-tip ... Oven light is not working properly. Replace ... Buy a replacement bulb. View the ... The rack positions that you would use when baking 3 racks in the convection mode would be racks 1,2 and 4.

Thermador Range/Stove/Oven Parts - RepairClinic.com

www.repairclinic.com/Shop...Parts/.../Thermador-Range-Stove-Oven-Par...
Huge selection of Thermador Range/Stove/Oven parts in stock. Same day ... Stove top potentiometer Kit that contains 2 potentiometer's and 1 simmer controller.

[PDF]for Thermador Professional Series Built-in Wall Ovens

www.msaworld.com/.../Service-Manual-Therm-Pro-BIWO_RevA3.pdf

Dec 19, 2015 | Thermador C272 Electric Double Oven

1 Answer

I need a wiring diagram or schematic for an Amana Model AGDS902E Gas Range


http://www.appliancepartspros.com/parts-for-amana-agds902e-p1131831n-e.html
They have some diagrams, offer manuals, parts, & how to videos
24/7 Customer Support

app-logo.png?d=0914142

365-day-returns.png Amana + RangeAmana Range AGDS902E / P1131831N E Parts
Amana Range AGDS902E / P1131831N E Repair Parts Start New Search
SHARE:
Chat with a Pro AGDS902E / P1131831N E Range-S/c S/i Ddraft Gas Search
Most Popular Parts for Amana AGDS902E / P1131831N E whirlpool-oven-igniter-786324-ap2934763_01_th.jpg Sale Oven Igniter (9) View Repair Video whirlpool-top-burner-igniter-y0316773-ap4283295_01_th.jpg Top Burner Igniter View Repair Video whirlpool-broil-pan-set-4396923-ap3837379_01_th.jpg Broil Pan Set View Repair Video whirlpool-bracket-3801f656-51-ap4395315_01_th.jpg Bracket (2) whirlpool-sensor-temperature-y0314907-ap4282440_01_th.jpg Sensor, Temperature View Repair Video whirlpool-module-w-bracket-32020101-ap4041505_01_th.jpg Module W/bracket (1) View Repair Video whirlpool-oven-door-hinge-r0706010-ap4251866_01_th.jpg Oven Door Hinge, Left Side
whirlpool-assy-hinge-right-r0706011-ap4252510_01_th.jpg Assy, Hinge Right Download Manuals for Amana AGDS902E / P1131831N E Range-S/c S/i Ddraft Gas - Owner's Manual How to Troubleshoot and Repair Amana AGDS902E / P1131831N E Real advice from real customers just like you
Do-It-Yourself Stories from Customers like You Stephen F. bought this part whirlpool-oven-igniter-786324-ap2934763_01_th.jpg sale
Whirlpool Oven Igniter View Repair Video Oven took long time to ignite and when it did it came on with noise Stephen F. • Star Junction, PA • June 20, 2014 My Repair & Advice I looked up oven igniter on line and watched video, very helpful, then called and a women was able Read More...
Was this review helpful to you? 2 People found this story helpful
Do-It-Yourself Rating
  • 1
  • 2
  • 3
  • 4
  • 5

Easy Difficult Repair Time Estimate
Less than 15 minutes Corey B. bought this part whirlpool-bracket-3801f656-51-ap4395315_01_th.jpg
Whirlpool Bracket Needed anti tip plate Corey B. • Portland, OR • November 03, 2014 My Repair & Advice By moving the stove, installing with a few screws and sliding it back into place.
Was this review helpful to you? Do-It-Yourself Rating

  • 1
  • 2
  • 3
  • 4
  • 5

Easy Difficult Repair Time Estimate
30-60 minutes How-to Videos for Amana AGDS902E / P1131831N E How to Replace Oven Igniter
How to Replace Top Burner Igniter
How to Replace Broil Pan Set
How to Replace Sensor, Temperature

Nov 25, 2014 | Amana Kitchen Ranges

1 Answer

How do i adjust the bowl height on an ksmc5os?


I'm not familiar with your model but on stand mixers with crank handle bowl lift there are 2 places for it to be. With bowl lift down there can be s screw straight in from the front on the pedestal just above the bowl lift sliding bracket, the full range of adjustment is half a turn, anti clockwise to raise, clockwise to lower. The other one is a small screw sticking down from under the gear case where the bracket that carries trhe bowl slides up and down. Clockwise to lower, anti clockwise to raise.

Aug 19, 2014 | KitchenAid KSMC50S Commercial Stand Mixer

1 Answer

Is there a bracket for prevention of tip over? We had a home inspection for the sale of our property and the inspector said that we should consult the manufactures safety section to prevent the stove from...


Yes, there is a bracket that should be mounted to the floor in the back. The back leg of stove slides into it. You can call any appliance parts outlet, give them your model number, and have it shipped to you if you wanted to do yourself otherwise a handyman should know how to do it.


Rich
Western Appliance Repair Meridian

Nov 19, 2010 | Whirlpool GR448SS Electric Kitchen Range

1 Answer

Where and how to install anti tip bracket


The anti tip bracket is installed along the baseboard area BEHIND the range, so that one of the rear feet on the appliance will slide into it when pushed against the wall. Once installed, the rear foot of the range is slid into the bracket, holding the rear foot to the floor. This effectively prevents the range from tipping forward.

Installation instructions are included on page 3 of the Installation Manual that came with the appliance. If you no longer have a copy, you can obtain a replacement at managemylife.com. Just enter your model number under their "Manuals" link and you will find it listed in .pdf (Adobe) format. You can download or print a copy for FREE. For your convenience, here's a direct link:

http://www.managemylife.com/mmh/installation_guides/3001/MAYTAG-Free-Standing-Electric-L0502644?brand_name_search=mer5775q

Figure 3 shows an excellent illustration of how the bracket is to be installed.

If you have any questions, please post back and let me know. I hope this helps you.

Oct 21, 2010 | Maytag MER5775Q Electric Kitchen Range

2 Answers

Need instructions on how to change the lifters in my 1998 Chevy S10 2.2L


Please don't forget to rate!!!!

2.2L Engine When installing new lifters, a pre-lube should always be applied to the lifter body. It is also a good idea to prime hydraulic lifters by submerging them in clean engine oil and depressing the plunger using an old pushrod. This allows the internal components of the hydraulic lifter to coat with oil before initial operation in the engine. All lifters should be replaced when a new camshaft is installed.
If any valve train components (lifters, pushrods, rocker arms) are to be reused, they must be tagged or arranged during removal to assure installation in their original locations.
  1. Remove the rocker arm cover.
  2. Remove the cylinder head assembly from the engine.
  3. Remove the bolts retaining the lifter anti-rotation brackets, then remove the brackets.
  4. Remove the hydraulic roller lifters from the bores.
  5. Inspect the lifter and lifter bore for wear and scuffing. Examine the roller for freedom of movement and/or flat spots on the roller surface.

a3ab0ce.gif
Remove the bolts retaining the lifter anti-rotation brackets ...


bb0d44a.gif
... then remove the anti-rotation brackets


79533e9.gif
The lifters are located in bores in the engine block


a298166.gif
Use a lifter removal tool to remove the lifters from the bore

To install:
If installing a new lifter, coat the lifter body with a suitable camshaft pre-lube
  1. Install each hydraulic lifter to its bore being careful to align the flat sides (top) of the lifters with the flat sides of the anti-rotation brackets. When properly installed the flat sides of each lifter are aligned parallel to the anti-rotation bracket. The roller at the bottom of the lifter is parallel to the camshaft lobe.
Make sure to properly align and install each lifter as improper installation of the lifters or brackets could result in engine damage.
  1. Install the anti-rotation bracket retaining bolts and tighten to 97 inch lbs. (11 Nm).
  2. Install the cylinder head.
  3. Install the rocker arm cover.

d477687.gif
Removing the hydraulic roller lifter from the 2.2L engine

Feb 06, 2010 | Chevrolet S 10 Cars & Trucks

1 Answer

Oven anti-tip bracket


Hi Jodie,

The anti-tip kits are installed on the floor behind the oven. They're installed BEFORE the oven is moved into place. They are "U"-shaped and when the oven is slid into place, the "U" locks into the back legs of the oven to lock it down.

You can tell if yours is so equipped by simply sliding the oven out away from the wall about 10 inches then looking behind it on the floor. Slide the oven out by opening the door about 5" and place your hands inside... then lift and pull toward you at the same time.

Here is the anti-tip kit for yours... If you see this down there, then you're good to go. If not, order both of those parts (in the previous link) 'cause you'll need them.

Hope this helps!

SG


7cadd9b.jpg

Apr 22, 2009 | Ovens

2 Answers

Anti-tip bracket for Amana ACF422GAW


screw in a piece of wood or metal that stickes out a little ways horizontally across the back of the stove. Screw another piece of wood or metal onto the wall a tad bit higher then the one on the stove. Now the stove can't tip over and it'll be easier to manuver into place.

Aug 11, 2008 | Kitchen Ranges

1 Answer

How to replace the ceramic range top


you need to replace the glass top itself???that might be an expensive proposition.but heres the how to. theres 2 or3 screws along the front underside of main top. this will release the top enabling you to tip back and look underneath.not a hard job, just gonna take some patients. assuming you have the new top. its gonna be a matter of taking from one and installing on other. you will not have to undo any of the wires leading to the burner elements. instead undo the screws that are holding the elements up to the top . should be 2 brackets running lent gh of unit . undo the brackets and lay the elements down on the insulation . after removing both swap out glass and reinstall new . there will be multiple ***** holes on new glass for supporting brackets. look closely at old one for proper placement

Mar 12, 2008 | Frigidaire FEF364DQ Electric Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

paulcarew

Level 3 Expert

2515 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...