Question about Cell Phones
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: C448 on Toshiba e-studio 2500c
C448 indicates Heater lamp lights continuously for a certain period of time when the pressure roller temperature during ready status is higher than the specified.
1. Clear status counter
Enter 08--> 400 --> change the value from "32" to "0", press Enter and restart MFP.
If occur again, u need to check followings:
1. Check the power supply and fuser unit
2. Check the LGC board
Posted on Mar 09, 2009
C448 means you have a fusing unit malfunction. The fusing unit is the part that gets hot just before the paper comes out of the machine. You can try clearing the code using this reset procedure:
(1) Turn the power ON while  and  are pressed simultaneously.
(2) Key in "400", then press the [START] button.
(3) Change the displayed current status counter value "32" to "0", then press [ENTER] or [INTERRUPT] (to cancel C448).
(4) Turn the power OFF and then back ON.
If the code comes back you are going to need a fusing unit.
Posted on Oct 22, 2009
Tips for a great answer:
Jan 18, 2016 | Toshiba E-Studio 3040c Color Copier
Aug 25, 2014 | Toshiba e-Studio 3540C Multifunction Color...
Jul 17, 2014 | Toshiba E-Studio 3540c Color Copier,...
May 12, 2014 | Toshiba e-Studio 3540C Multifunction Color...
Jul 07, 2012 | Toshiba e-Studio 2540C Multifunction Color...
Oct 22, 2009 | Toshiba Office Equipment & Supplies
Oct 22, 2009 | Toshiba E-Studio 3511 Color Copier
Jul 20, 2009 | Toshiba E-Studio 161 Copier
Feb 04, 2009 | Toshiba E-Studio 161 Copier
42 people viewed this question
Usually answered in minutes!