Question about Cycling

1 Answer

Problem with gears cant get fifth, sixth and seventh

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 484 Answers

Shift your bike to its highest gear and release the cable on the rear derailleur. Adjust your shifter adjustment knob to fully turned in and the rear derailleur's adjustment knob to the middle of its range. Pull the shifter cable taut and re-tighten. Now you should be able to span your gears. Go to your middle gear and set the rear derailleur by using the adjustment knob to center the jockey wheel on the drailleur (what the chain rolls on) over the middle cassette cog. You should be good from there, but you might need to adjust the high/low settings, too, although it is doubtful. If you do, for high you want the jockey directly over the smallest cog and for low you will want it ever so slightly past the largest cog towards the spokes, but not TOO far past. i usually go 1/2 the width of the cog past it.

Posted on Jul 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

REVING UP


check clutch adjustment.

Aug 18, 2014 | Motorcycles

1 Answer

The math club has 57 members who are in sixth or seventh grades. There are twice as many sixth graders as seventh graders. How many sixth graders are in the club?


Assume that the letter "a" represents the number of 7th graders.
Since there are twice as many 6th graders we can call them "2a".
There are 57 total members, we can make the following statement:
2a + a = 57
We can simplify this to say 3a = 57.
Divide 57 by 3 = 19. (this is the value of "a")
There are 19 seventh graders and 19 x 2 sixth graders or 38.
38 + 19 = 57

Sep 20, 2013 | M2K Garfield: It's All About Math Math...

1 Answer

I have a TDK HD-01 head demagnetizer for cassette decks, but I have lost the instructions. Could you help?


Hi there.
First - Turn On The Tape Demagnatiser (should be a switch on it)
Second - Insert into cassette player
Third - Turn On cassette player
Fourth - TURN DOWN VOLUME ON AMPLIFIER TO MINIMUM (This is essential!)
Fifth - Press Play on cassette player
Sixth - After 10 seconds press stop on the cassette player
Seventh - Remove the cassette demagnetizer from the cassette player
Eighth - Turn off the demagnetizer and put back in it's usual storage place

AGAIN, MAKE SURE THE VOLUME IS TURN TO MINIUM WHEN USING THIS AS THE NOISES CAN DAMAGE SPEAKERS.

Jan 07, 2011 | Audio Players & Recorders

1 Answer

Will not read disks. Cycled power usally worked not this time.


First Turn your X-box on
Second Take out your game or CD
Third Open tray
Fourth Close tray
Fifth Repeat Third and Fourth a couple times and let it load then open
Sixth Stop when you hear the xbox make a spinning noise like when it is reading a game
Seventh Open tray
Eighth Pit a game in
Ninth Close tray
Tenth Play you game!

Dec 30, 2010 | Microsoft Xbox 360 Console

2 Answers

I am having a optiplex gx270 but i am facing a problem to install harddisk even i changed jumpersettings it is not working and even cable also changed but i donno watz the problem


First think I would try would be to set bios back to default
Seconed, set all drives to auto in bios
Third remove the cd cable from the motherboard
fourth try drive on cable select
fifth try drive on master
sixth is drive fdisked?
Seventh try drive on another computer.

Jan 15, 2010 | Dell OptiPlex GX260 PC Desktop

1 Answer

I cannot go down my list of who has phoned


Press the 'CID/FLASH' button to review the telephone-numbers of those who have called you.
Then, use 'UP/DOWN' to scroll through the list of callers.

Set the Panasonic to answer after *EIGHT* rings -- after *FOUR* rings, SaskTel's voice-mail will "answer" the call. So, there will not be "fifth" and "sixth" and "seventh" and "eighth" rings, and so your answering-machine will never get a chance to "answer" the call.

Jun 05, 2009 | Panasonic DECT 6.0 Expandable Cordless...

1 Answer

Getting raft back


First step: Move 1 wolf and 1 chick
Second step: Bring 1 chick back
Third step: Move 2 wolves
Fourth step: Bring 1 wolf back
Fifth Step: Move 2 chicks
Sixth Step: Bring 1 chick and 1 wolf back
Seventh Step: Move 2 chicks
Eighth Step: Bring 1 wolf back
Ninth Step: Move 2 wolves
Tenth Step: Bring 1 wolf back
Eleventh Step: Bring 2 wolves over

That's it!



Mar 23, 2009 | Nintendo Professor Layton & the Curious...

2 Answers

Stuck on puzzle 7


Here is the real solution:

First step: Move 1 wolf and 1 chick
Second step: Bring 1 chick back
Third step: Move 2 wolves
Fourth step: Bring 1 wolf back
Fifth Step: Move 2 chicks
Sixth Step: Bring 1 chick and 1 wolf back
Seventh Step: Move 2 chicks
Eighth Step: Bring 1 wolf back
Ninth Step: Move 2 wolves
Tenth Step: Bring 1 wolf back
Eleventh Step: Bring 2 wolves over

That's it!

Feb 18, 2009 | Nintendo Professor Layton & the Curious...

4 Answers

Crossing of wolves and chicks


Hi, try this bro!

First step: Move 1 wolf and 1 chick
Second step: Bring 1 chick back
Third step: Move 2 wolves
Fourth step: Bring 1 wolf back
Fifth Step: Move 2 chicks
Sixth Step: Bring 1 chick and 1 wolf back
Seventh Step: Move 2 chicks
Eighth Step: Bring 1 wolf back
Ninth Step: Move 2 wolves
Tenth Step: Bring 1 wolf back
Eleventh Step: Bring 2 wolves over Take the 3 wolves first kick them until they run away go back and take the chicks across (That is if the wolves havent killed you)

Nov 23, 2008 | Nintendo Professor Layton & the Curious...

Not finding what you are looking for?
Cycling Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cycling Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

kakima

Level 3 Expert

102366 Answers

John Egan
John Egan

Level 2 Expert

73 Answers

Are you a Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...