How do i connect power to panasonic cq-bs0901cj

didnt specify vehicle -generic answer -notify dealer with vin and proof of ownership when battery was disconnected radio thinks it is stolen

hi Alex,

It can be loose connection.please check all plugs and jacks.
specially power + wire and fuse etc.....

then if the problem is same internal loose connection maybe a problem.you must do the electronic repair for that.
regards,
nuwan.

I have panasonic car audio model 08545-00s21 ref no.cq-bs0901cj s/n 712689 i want code

Make sure you hooked up power ground and accessory. If you are connecting it just to make that it powers up, ut the yellow and red together and connect them to power at the battery. Connect the black to ground. Make sure the battery has power as well.

Generally, eBay is the best place to get a replacement faceplate.

are you running the rest of your speakers off an amp? if so, it sounds like you have the amp remote wire connected to the power antenna wire. on some radios there is an amp remote wire and a power antenna wire. the power antenna wire loses power when not listening to the tuner (radio). usuall there is a solid blue and a blue with white stripe. the blue with a white stripe should be amp turn on.

Hello,

Yes, the Panasonic CQ-C1100U can be connected to a 2-channel amp. It has a single set of preamp outputs. I'm attaching an image of the connection shown in the Panasonic user manual. The appropriate connection is the one without the dashed line. The dashed line showing a 2nd set of outputs only applies to the 1110, 1120, and 1200 models.

Hope this helps. If it does, please rate as "FixYa". Thanks!

in the car u will need 1 backup power wire and 1 accessory power and a ground wire connections

Yes the hook is the round port on the top right side of the back of the unit right above the main hook ins for power, ground, and speakers.

try this site
http://safemanuals.com/314159.php?k=b4e67496297a50a8aaae919324041f9c&ID=195802&q=PANASONIC CQ-C1313NW