Question about Singer 14SH654

1 Answer

I'm having problems with my singer sewing machine: Model number 14SH654. The machine was working fine, and then I didn;t use it for a few months. Now the stitches are not looping. It looks like the top stitch is there, but it looks like the bottom stitch is not looping. How can I reset the top and bottom looper or dial?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,734 Answers

You will most likely find that just adjusting the stitch length and width controls for a while will correct the problem (if the machine has been sitting idle for some time the stepper motor linkages seem to stiffen up a bit but i have good success with continual adjustment until they free-up.

also try switching machine off and on again to ensure it resets correctly.

the combination of both above fixes works 95% of the time - otherwise, as you mentioned circuit board and or stepper motor replacement may be necessary (however if both length and width are playing up it is unlikely to be an electrical fault).

Posted on Jul 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need part number for a part on singer 14sh654


Singer has a PDF with the illustrated parts list for the 14sh654 available here: http://parts.singerco.com/CPpartCharts/14_CG_J_SH_T/14SH644_14SH654.pdf . There are two different models listed for 14sh654 manuals. However you can download them (or buy them). To download the Ultralock with incandescent lamp manual, go to http://www.singerco.com/uploads/download/434_14sh644_654_e.pdf . For the Finishing Touch (LED lamp), the manual is http://www.singerco.com/uploads/download/555_14sh644_654-(e_s_f)-(new-led-version).pdf .

I hope this helps.

Cindy Wells

Sep 24, 2011 | Singer 14SH654

1 Answer

ViraI have misplaced my sewing machine manuel and I need to know how to use my Singer Finsihing Touch Serger 14SH654.


FREE INSTRUCTION MANUAL DOWNLOAD
Go to the singer website
Go to the home page
At the bottom of the page look for instruction manual--click on it
It will take you to another page
In the box put the model number (example 14SH654 ) & click search
They have a free download--they have 2 free downloads you'll have to see which one you need

Aug 15, 2011 | Singer 14SH654

1 Answer

I have a singer serger model #14sh654 an all of a sudden it will not sew. The material just keeps getting caught in the aterial and will not go any where. I have tried everything.


I had the same thing happen when I bought a used 14sh654 machine, it was the knives, upper and lower. I bought them online for about $15. My husband installed them so I didn't have to pay for service. It is worth a shot. A repair shop wanted $89 plus $30 for the knives. So I was very happy, the machines sews better than my Babylock Protege now. Good luck

Mar 14, 2011 | Singer 14SH654

1 Answer

14SH654: Singer 247 Machine runs fine and then bottom bobbi...


Try using a style 60 or 66 bobbin. I had the same problem at first, and someone on-line suggested the different bobbin. I use a style 66; instead of having a flat bottom and top (and all those holes), it's shaped something like a bagel. Now my machine works beautifully.

May 16, 2010 | Singer 14SH654

2 Answers

Need manual for singer 14u52a this is the right model # not 14sh654 thanks


You should also try www.sewusa.com. I found the manual for a used Necchi 521FB I brought. Hope that helps.

Feb 11, 2010 | Singer 14SH654

1 Answer

What would a singer cat B.T.7 serial number 2196382 good condition with wooden carring case be worth, running condition


Cat B.T.7 is the model of the motor, not the machine. They were used on a variety of older Singers. You probably have a #99 or #66.I see them at garage sales for $25 or so.

Aug 23, 2009 | Singer 14SH654

1 Answer

Singer 14SH654


Either it's not up all the way or your timing is off. Check needle first

Aug 21, 2009 | Singer 14SH654

1 Answer

Trouble with singer ultralock 14SH654


The motor could have gone...........Did you smeel plastic burning?The footpedal may be broken.Ask a shop if you can buy one and return it if thats not the problem..

Mar 14, 2008 | Singer 14SH654

Not finding what you are looking for?
Singer 14SH654 Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Cindy Wells

Level 3 Expert

5269 Answers

mystery_soul

Level 2 Expert

48 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...