Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

02F message - Whirlpool Duet GHW9150P Front Load Washer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,911 Answers

"F02" is a Long Drain error code. It usually means you have something clogged in the drain pump, or restricting the drain lines. The following link explains how to check:

http://www.fixya.com/support/r615268-f02_error_code_whirlpool_duet_kenmore

If cleaning the pump does not correct the problem, a new drain pump may be required. If the pump impeller or motor is damaged and the pump does not pump at the proper volume, the error code will still occur. This is because the error is caused if the drain cycle takes longer than 8 minutes. If the pump is not moving the correct volume of water, the error code will still occur.

If a replacement pump is needed you can purchase them at searspartsdirect.com, appliancepartspros.com, pcappliancerepair.com or repairclinic.com. All these sites offer great service with competitive pricing. So shop all of them for the best deal. Use your model number (located around the door opening) for your search criteria.

If you have any questions, please let me know. I hope this helps you.

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore Elite Smartwash QuitPak9 washer. I keep getting error messages 02F and Sud or 5ud . Seems washer will not drain , Can get it to drain sometime , no clog


its a suds sensor error. meaning tom much or the wrong detergent was used and it has clogged the wash cycle, you will have to try to run rinse cycles over and over to u clean it out if u can, some machines have an auto clean cycle for this problem, it is difficult to deal with as I have the same issue with one of mine and still not running right

Jan 07, 2017 | Kenmore Washing Machines

1 Answer

I have a duet front load that want run a load it say 02f what does this mean


Long Drain

If the drain time exceeds 8 minutes, the water valves are turned off and "F/02" is flashed.

Press PAUSE/CANCEL twice to clear the display. NOTE: After 4 minutes the "Sud" error will be displayed, then 4 minutes later

the F/02 error code will be displayed.

Potential Causes • Check the drain hose and make sure it is not plugged or kinked • Check the electrical connections at the pump and make sure the pump is

running. • Check the drain pump filter for foreign objects • If the above does not correct the problem replace the pump

Feb 02, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Sometimes the water will not drain out, of my Kenmore Elite HE3 washer and it will display 02F. The door will not open, when I press the drain/spin button it makes a funny noise, won't drain, nor will it...


Hi, You pump filter screen is clogged up of you may even actually have something stuck in the pump. Unplug machine, remove the bottom front panel 2-3 screws along the bottom. look for the filter/screen housing next to the pump. place a shallow pan under it. Be prepared for lots if water and debris. Unscrew it slowly to drain then screw it back in to shut off and dump pan repeat until no longer full of water. Remove and clean all debris out screen, housing and hose.

Nov 01, 2010 | Washing Machines

1 Answer

Sud keeps popping up on the display or 02F flashes & then it stalls.....help!


I just fixed mine. Take off the the front kick paned (3 screws), in the center inside is a handle, turn it, but be careful a ton of water comes out. Inside there is a plastic cylindr that was coated and plugged up with a bunch of smelly linty type yuk. I cleaned it out real well and it works and smells great.

Jun 30, 2010 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

02f code


Hi


Thanks for using FixYa. F/02 error means Long Drain. If the drain time exceeds 8 minutes, the water valves are turned off and "F/02" is flashed. Press PAUSE/CANCEL twice to clear the display.
  • Check the drain hose and make sure it is not plugged or kinked.
  • Check the electrical connections at the pump and make sure the pump is running.
  • Check the drain pump filter for foreign objects.
  • If the above does not correct the problem, replace the pump.
Please do rate the solution if the issue is resolved or post a comment for further assistance.



Thanks
Rylee

Jul 18, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My kenmore elite HE3 front oading washer says 02F


"F02" is a Long Drain error code. This indicates that you have an obstruction in the drainage system. More than likely you probably have a clog in the drain pump. The following link explains:

http://www.fixya.com/support/r615268-f02_error_code_whirlpool_duet_kenmore

Included is a follow-on link that explains how to check the drain pump to clean. You may also have to remove the inlet hose that runs from the bottom of the wash tub to the inlet side of the drain pump. Debris can commonly clog in this area as well causing the drain cycle to fail.

If you have any questions about this repair, or need additional assistance, please let me know. I hope this helps you.

NOTE: If these preliminary measures do not correct your problem, you may have to replace the drain pump. It does not take much to damage the pump impeller or motor. Since the error code is generated if the drain cycle exceeds 8 minutes, if the pump is damaged and can't pump at the required volume, the error code will continue to appear until the pump is replaced.

Sep 18, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Machine will not open and displays 02f error


“F02” is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be generated as a secondary error. This is an indication of a drain pump problem and/or clog in the drain line. You will need to check the following:

1. Check the drain hose to make sure it is not kinked or clogged.
2. Check the electrical connections to the pump and ensure the pump is running.
3. Remove the drain pump filter and check for foreign objects and/or debris.

To check the drain pump, click on the following link for step-by-step instructions.


http://www.fixya.com/support/r385844-checking_drain_pump_kenmore_elite_front

If the above procedures do not correct the problem, it is recommended by the manufacturer to replace the drain pump


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 12, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Whirlpool duet won t spin continues to beep and


"F02" is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a "SUDS" error may also be generated as a secondary error. This is an indication of a drain pump problem and/or clog in the drain line. You will need to check the following:

1. Check the drain hose to make sure it is not kinked or clogged.
2. Check the electrical connections to the pump and ensure the pump is running.
3. Remove the drain pump filter and check for foreign objects and/or debris.

To check the drain pump, click on the following link for step-by-step instructions.


http://www.fixya.com/support/r385844-checking_drain_pump_kenmore_elite_front

If the above procedures do not correct the problem, it is recommended by the manufacturer to replace the drain pump


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jun 16, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Something chewed up


What you have is called spider failure. This is the three spokes that connect the basket to the spindle. The plastic is shavings of your tub.You need to get the rear of the tub replaced and the basket replaced.

Sep 18, 2008 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2128 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...