Question about Toshiba Laptop Keyboard for Satellite L10, L15, L20, L25, Tecra L2 Series

1 Answer

Need to install sata driver on hp dc7100 windows xp sp3

I have downloaded the driver but how do i make the disk bootable and install the files? im new to this also :) the only drive available is a:\ do i need a windows 98 boot disk??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 4,806 Answers

Hi,
Drive a:\ refers to a floppy drive, if you have not got a floppy drive in the laptop then i suggest that you borrow or purchase a USB one, they are not expensive !!!
When you have got a USB floppy drive all you have to do is format a floppy disk in the FAT file system and copy the drivers to the floppy disk.
Plug the floppy disk in the machine that you want to install XP on, start the install as you normally would and look at the bottom of the screen for where it says "press F6 to install third party drivers" and hit F6 as soon as you see that prompt, let it get to the stage where it displays your drive and it should pick up the SATA drive you have in the machine and install windows.
Post back if you need any more help or advice.



Good luck.

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i get the diskette, that can reboot my personal computer.


Which operating system ???????
First make sure you have the serial key.

http://download.cnet.com/%7Bvalue=http://www.download.com/magical-jelly-bean-keyfinder/3000-18487_4-10079600.html The Magical Jelly Bean Keyfinder is a freeware utility that retrieves your Product Key (cd key) used to install windows from your registry.

It has the options to copy the key to clipboard, save it to a text file, or print it for safekeeping.


Create an xp pro sp3 iso omage

Download the SP3 installation ISO. Save it to your Desktop.
Download ImgBurn and save it to your Desktop.
Double-click the installation executable for ImgBurn and click "Next."
Follow the remaining onscreen prompts and click "Finish" to complete installation of ImgBurn.
Insert a blank CD-R/DVD-R into your DVD drive.
Open ImgBurn by going to "Start," "Programs" and "ImgBurn."
Click "File," then "Browse for a source file."
Navigate to your Desktop and select the SP3 ISO file. Click "Open."
Click the blue "ISO to CD" button located on the bottom left of ImgBurn.
The program will begin creating the Windows XP SP3 installation CD.
This process may take anywhere from 10 to 20 minutes to complete depending on the speed at which the CD-R/DVD-R is being burned.
Click "OK" once the CD-R/DVD-R has finished burning.
You've successfully created a Windows XP SP3 installation CD.
http://www.microsoft.com/downloads/details.aspx?FamilyID=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en
xp pro sp3 iso
http://www.imgburn.com/
Download the iso also download the imageburn
or
http://windows-xp-pro-startup-disk.soft32.com/
Bootable disk for XP Professional.
The Windows XP start up disk allows computers without a bootable CD-ROM to perform a new installation of the operating system.

Jun 25, 2013 | Compaq Armada M700 Notebook

1 Answer

How do i load windows xp on hp nx8220 it goes to microsoft then back to start windows normally then repeats is there a solution thankx


the reason why is because ,hp computers use a different set of video drivers than does win/microsoft, when upgrading to xp you must install xp 1st release no svc pacs, then must have the hp video drivers oem for the model you are installing xp to , they can be downloaded on hp driver download, or the intel driver download site, unless you have a different chip set, the oem drivers must also be puton either a floppy disk or cd , that is made bootable from restart, make shure either the A drive or the C drive is set to boot before the hard drive so it will pick up the bootable disk you made with the downloaded drivers , then reboot the computer with the xp disk , at the disk partion screen select leave old files intact with the new install !

Jan 22, 2013 | HP Compaq nx8220 Notebook

2 Answers

I cannot get rid of pceu virus on a windows xp pro fujitsu desktop because it has disabled safe mode and I do not have the windows xp cd to reinstall windows and the cd/dvd drive does not work .


Download the SP3 installation ISO. Save it to your Desktop. Download ImgBurn and save it to your Desktop. Double-click the installation executable for ImgBurn and click "Next." Follow the remaining onscreen prompts and click "Finish" to complete installation of ImgBurn. Insert a blank CD-R/DVD-R into your DVD drive. Open ImgBurn by going to "Start," "Programs" and "ImgBurn." Click "File," then "Browse for a source file." Navigate to your Desktop and select the SP3 ISO file. Click "Open." Click the blue "ISO to CD" button located on the bottom left of ImgBurn. The program will begin creating the Windows XP SP3 installation CD. This process may take anywhere from 10 to 20 minutes to complete depending on the speed at which the CD-R/DVD-R is being burned. Click "OK" once the CD-R/DVD-R has finished burning. You've successfully created a Windows XP SP3 installation CD.
http://www.microsoft.com/downloads/details.aspx?FamilyID=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en xp pro sp3 iso http://www.imgburn.com/ Download the iso also download the imageburn or

http://windows-xp-pro-startup-disk.soft32.com/ Bootable disk for XP Professional. The Windows XP start up disk allows computers without a bootable CD-ROM to perform a new installation of the operating system. Hope this helps.

Jan 21, 2013 | Fujitsu Computers & Internet

1 Answer

Restore Disks for Sony Vaio Notebook Model PCG-491L


Download the SP3 installation ISO. Save it to your Desktop. Download ImgBurn and save it to your Desktop. Double-click the installation executable for ImgBurn and click "Next." Follow the remaining onscreen prompts and click "Finish" to complete installation of ImgBurn. Insert a blank CD-R/DVD-R into your DVD drive. Open ImgBurn by going to "Start," "Programs" and "ImgBurn." Click "File," then "Browse for a source file." Navigate to your Desktop and select the SP3 ISO file. Click "Open." Click the blue "ISO to CD" button located on the bottom left of ImgBurn. The program will begin creating the Windows XP SP3 installation CD. This process may take anywhere from 10 to 20 minutes to complete depending on the speed at which the CD-R/DVD-R is being burned. Click "OK" once the CD-R/DVD-R has finished burning. You've successfully created a Windows XP SP3 installation CD.
http://www.microsoft.com/downloads/details.aspx?FamilyID=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en xp pro sp3 iso http://www.imgburn.com/ Download the iso also download the imageburn or

http://windows-xp-pro-startup-disk.soft32.com/ Bootable disk for XP Professional. The Windows XP start up disk allows computers without a bootable CD-ROM to perform a new installation of the operating system. Hope this helps.

Dec 26, 2012 | Computers & Internet

1 Answer

Vista Crashed does not recover (Can't install XP or 98SE either)


if you want to recover vista then download vista recovery disk here is the link 



http://rapidshare.com/files/145731926/WVRD_www.warezspark.com.part1.rar
http://rapidshare.com/files/145698726/WVRD_www.warezspark.com.part2.rar

password : www.warezspark.com

burn the ISO disc and boot from cd rom and get it repair it automatically.

if you want to installed windows XP or 98;the reason why your hard disk could not be detected is your hard drive is SATA. disable any sata setting in your BIOS IDE configuration( if setting is not available then download SATA driver and Nlite ;make a bootable windows xp disc  with SATA driver pre installed .
this is solve your problem

here is the link for lastet SATA driver

http://download.cnet.com/SATA-Driver-Intel-Ver-7-0-0-1020-zip/3000-2122_4-162224.html

here si the link for lastest nlite software

http://home.midmaine.com/~nlite/nlite/nLite-1.4.9.1.installer.exe

regarding how to make a bootable cd with nlite with sata driver check out this link

http://www.windowsreference.com/free-utilities/nlite-slipstream-servicepackshotfixespatches-create-bootable-windows-cd/

let me know if it's helpful to you
'


Dec 09, 2009 | HP Pavilion dv6000z Notebook

2 Answers

Error when installing XP on Vista


which service pack?? sp1 and 2 dont support sata harddrives you have to get sp3 on a disk or slipstream the drivers into the os cd for sata harddrives

Jun 05, 2009 | Acer TravelMate 5530-5207 Notebook

2 Answers

NO INTTALEDWIN XP IN SATA HDD


you need your windows xp disc preferably slip streamed with SP 2 or SP 3 and then you should be able to install it onto your sata hard drive.

If you are having issues then you may need to extract the sata drivers onto a memory stick or floppy disk and press F6 before windows xp loads and specify to use the sata drivers which you can download from the motherboards manufacturers website generally as a zip file which you will first need to extract into a folder.

If that does not work using the memory stick you can use nlite to slipstream the drivers with your windows xp disc :

Nlite download


if you need more help post back

Apr 11, 2009 | Mercury KVM800M Motherboard

3 Answers

I have a hp 6735s with win vista installed in it. i want to use win XP but it wont install in this computer system.what should i do?


Problem : When Windows XP was made there was no concept of SATA drives now ur drive is SATA and ur installation disc does not contain drivers for ur Hard disk thats why it is unable to find ur hard disk as it doesnt recognize it u need sata raid drivers on ur windows inst cd

Solution:

this specific model HP 6735 was shipped with vista OS and drivers now u are downgrading it to XP it depends on the installation disc if it is new one like SP3 included then u would have never faced this issue in ur case u should get a RAID driver from www.intel.com and then include them in ur copy of windows XP cd to load them at the startup of installation , so u need them in the first place to carry out installation, u have to do some job here download RAID DRIVERS from www.intel.com select ur board and chipset either it is 945 or 965 gm and then download nlite a software used to integrate these drivers to ur inst disk , u can also include SP3 thru this software in ur current win xp cd

http://www.nliteos.com/

just download sata drivers from intel and nlite from the link and install the software integrate these drivers and burn ur cd incl them and then install normally as u were installing them earlier now it will recognize ur drive simple for more info how to do check this out

http://www.zimbio.com/Laptop+Reviews/articles/10840/How+Integrate+Floppy+SATA+RAID+Driver+Windows

http://lifehacker.com/386526/slipstream-service-pack-3-into-your-windows-xp-installation-cd

pls dont forget to rate me fixya for this help if u like
pls let me know if i can help u more

Mar 12, 2009 | HP Compaq 6735s Notebook

2 Answers

Compaq presario v3700 windows xp not instaled


You require Xp Pro that supports SATA - standard Xp is IDE - you must aquire a copy of Xp that is SATA compatible.

Jan 27, 2009 | Compaq Presario C700T Notebook

17 Answers

Xp professional installation on hp pavilion dv6700 cto notebook


The original Windows XP Installation CD, a freeware application named NLite and a blank CD.
we need the drivers for the SATA controller provided by the manufacturer.

When you start the Nlite application, you will be asked to provide the location for the Windows installation package. Insert the genuine Windows Installation CD into the CD drive and, inside the application, select the CD drive letter.
To insert the SATA drivers within the installation package, you need to have it saved on the HDD. Hence, when the warning window appears click OK and select the destination folder for the files to be saved. Make sure that the destination partition / HDD has enough space to store the contents of the installation CD.

Immediately after you have chosen the destination folder, the application will start copying the Windows installation files. When finished, it will display some version information regarding the newly copied Windows Installation Package.
Now, click next twice until you get to a screen where you get options sorted in 4 categories: Integrate, Remove, Setup, Create. We are interested in the integration procedure, therefore select the Drivers button and click next. From the next menu window, click Import and select multiple drive folder option from the drop down menu. This option permits you to browse to the location where the downloaded drivers are found.
Select the containing directory and click next. You will get a list with the available drivers (in case there are more than one) or simply one driver. Select it (them) and click next. Now the application will ask for the permission to start the integration procedure. Choose Yes and wait for the drivers to be inserted into the installation package.
With problematic driver being included in the installation package you can install Windows XP on your SATA HDD...but...the installation package is on the HDD. You need a bootable CD in order to start an installation. Don't worry, once the installation package has been adorned with additional user selected drivers it can be transformed into a bootable disk image and later burned on a CD. To encapsulate the installation into a ISO image use the same Nlite application.
Open it, make sure the HDD installation folder is selected and click next. Select "Last session" preset and click next again. Now from the options menu choose Bootable ISO and click next. In the following window, make sure that the mode is set to "Create Image" and click Make ISO. A destination folder is required where the resulting ISO image will be saved. Once the image saving process finished you have the freedom to burn it on a blank CD with whatever you favorite CD burner software may be.

The new CD will be the twin copy of the Windows Installation CD but with one difference, it includes the SATA driver

Mar 17, 2008 | Microsoft Windows XP Professional With...

Not finding what you are looking for?
Toshiba Laptop Keyboard for Satellite L10, L15, L20, L25, Tecra L2 Series Logo

962 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...