WHAT DOES THE CODE OF MEAN WITH MY OLD GE DISHWASHER?

Question moved from Rifle Optic Sights to GE Dishwasher.

You have a code that doesn't exist.

https://www.searspartsdirect.com/diy/error-codes/dishwasher-repair/1234583/ge-dishwasher/0432

https://products.geappliances.com/appliance/gea-support-search-content?contentId=16673

Try a reset, and there are videos on fixing beeps

https://www.google.com/search?q=GE+Cafe+Dishwasher+beeps

..

This should solve your problem:
https://www.manualslib.com/manual/1337459/Winterhalter-Pt-M.html

means that the unit thinks the water coming into it isn't hot enough. It can be reset, but here is the way to avoid this problem. Run the hot water in the sink until it comes out hot. Then the unit shouldn't give this error.
All dishwashers require at least water of 140 degrees or higher

Hello,

Try unplugging the unit for several minutes if that does not fix the issue you will need to replace the main control board to fix the issue, let me know,

http://www.appliancerepairlesson.com/

Make sure the hot water is on

Pl refer user manual. In general flashing light may mean : no water flow, salt chamber empty, door not closed etc. It all depends on the error code message designed.assigned by the manufacturer.

The 1 H is not a fault code it is the delay time of one hour.

all dws are standard hight

This would be the motor that spins the dish washing unit in the bottom. The noise you hear might mean that the motor will need to be replaced.

I have the same problem, although my oven is 3 years old. I am having the door latch replaced today. cost $240. The repair company that I contacted sid that these ovens are their bread & butter!!! If I could afford it I would ship all of my GE appliances(which are only 3 years old mind you) to them and tell them to shove them!! I alreadt spent over $200 on my GE dishwasher which at the time was only 1 1/2 yearsd old.Did you clean the oven before the error code started [email protected]