Question about Pyramid Audio Players & Recorders

1 Answer

How to hook up a pyramid pro plus 4 channel pb-180px without using rca jacks for 6 by 9s

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

The pb180 has High Input receptacles on the back end. They are marked High Input and identified as Channels 1&2 left/right, and channels 3&4 left/right. You will need to identify all speaker wires coming from your head unit ( left front +&--) , and so on. You will be sending the speaker wires from the head unit to the pb180's High Inputs. In other words, the front left speaker wires(+&-) from the head unit will go to the High Input Channels 1&2 side, left input of the pb180, and so on, so the speaker wires coming out of the head unit will need to be cut. And LABEL all sets of speaker wires before you cut them! Then on the OUTPUT end of the pb180, you will be sending the wires back to the the respective speaker wires which are going to the speakers. So it's out from head unit to pb180 and out from pb180 to speakers.
Hopefully you have the plugs that Pyramid uses for the speaker wire inputs to the amp. If not you have to get creative, and make up terminals to fit into the input receptacles. Maybe a wire terminal from Radio shack will fit those pins..
Also, if you go on line: Google search "Pyramid auto amps" and click on "SEARCH" (upper right hand) of their Web Page. Plug in your model number like this, pb180, and you'll be able to download the manual for this amp. The manual has a full description of the wiring options.

Hope this was helpful and Good Luck!

Posted on Jul 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the red light come on when i hook the power wire up to my car amp?


Could be fried, or connections are wrong and its not getting a good ground. If you're not getting power most likely its fried. Check fuses etc. Take it to a brandsmart and have them test it

Aug 26, 2014 | Pyramid - America: 4 Channel 1800W America...

1 Answer

How Can you record tv show using a converter box


Hook the converter box cables to the input RCA jacks on the back of the VCR, then hook the output RCA jacks to the input RCA jacks to the TV, Keep the VCR on channel 3 or 4, on the TV in menu scroll through the source settings to find the what source the vcr is using

May 05, 2014 | GE Vg4261 Vhs Tape Vcr Plus 4 Head Hq...

1 Answer

I have a pyramid amp and i don't know what watt it is and it doesn't say. the model no. is PB-700A. it's an older amp thank you


  • 4-Channel
  • 350W X 2 Max @ 4ohm
  • 700W X 1 Bridged @ 4ohm
  • Dim: 2.4"H X 10.7"W X 6.9"L
  • Mosfet Pwm Power Supply

Jun 07, 2011 | Pyramid Car Audio & Video

1 Answer

How do i install a pyramid pb880 4 channel mosfet amplifier?


run rca cables and a remote wire from your radio to the amp,run a power wire from your battery and attatch a ground to the car ,then hook up the wires and cables to there respective places.

Jan 15, 2011 | Pyramid Car Audio & Video

1 Answer

Using RCA P61939 without Guide Plus


Guide plus still works even if you don't have the wand hooked up. In the setup section of the guide plus there are several questions that must be answered properly or it won't function as you would like. It maybe labeled as options as well. Thanks

Oct 02, 2009 | RCA P61939 61" Rear Projection Television

1 Answer

Don't know how to set channels w/new cable box.


Use channel 3 or 4 or hook up the RCA jacks. If you use 3 or 4 leave it on that channel and use the cable box to change channel. Use RCA jacks (best) turn the channel on the recorder to line in ether LINE1 or LINE2 with one you plug it up to and leave it on that channel.

Jul 23, 2009 | Toshiba RD-XS32 DVD Recorder

1 Answer

Hi,just bought a 6x9 jbl gto937 speakers for my car,each speaker is 100watt rms and 300 max .Can anybody advice on what amplifier should i get for them?I know i can run them without any amp but think they...


Pyramid makes the PB series of amps. I have one that's driving a Sub.
The PB 700 puts out rms 60watts x 2 @ 2ohms, which gives you some "headroom" for your speakers. You don't want to over drive speakers with , for example, a 1000 watts for 100 watt speakers, because that's a good way to blow your speakers.
There are many brands and models of amps that will fit your speakers. Just make sure the amp will drive 2ohm speakers, since your jbl's are rated at 2ohm impedance.
You may want to consider adding a Sub woofer to your setup. A single Sub would fill in the low end very nicely. If you got a 4 channel amp, then two channels will drive your jbl's, and you can bridge the other two channels to drive the Sub. That would be a kick'n sound!
Just make sure the amp is bridgeable
For example, the Pyramid PB 1200 is a 4 channel, bridgeable amp. This particular amp will drive the 2ohm jbl's, but you would want a 4 or 8 ohm Sub connected to the bridged channels.

Jul 05, 2009 | JBL GTO937 Car Speaker

1 Answer

Connection for y pb pr cables


The color-coding used for the RCA connectors is nearly universal:
  • composite video - yellow
  • audio - red (right channel) and white (left channel)
  • component video - green (Y), blue (Pb) and red (Pr)
Also, these jacks are normally labeled in print as well, although it's sometimes hard to read the text on some equipment.

Match the connectors on your converter box to the corresponding connectors on the TV. If your converter box was one purchased with the $40 US Government coupon, it may not have the component video outputs. The only coupon-eligible boxes are the most basic models, and they sometimes have only RF (channel 3 or 4) and composite video outputs available.

May 03, 2009 | iLO 3200 32 in. LCD Television

2 Answers

Need new RCA jack


well you can take it to sound repair company which will void any warranty or send it into the manufacturer but for the price of that you can get a new amp at wholesale dealer cost at this address
www.godspeedaudioheaven.com

Feb 02, 2009 | Pyramid PB779X Car Audio Amplifier

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pyramid Audio Players & Recorders Experts

protojexxx

Level 1 Expert

43 Answers

Gregg Errera
Gregg Errera

Level 1 Expert

42 Answers

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

Are you a Pyramid Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...