Where do i get a fan blade for modle91800 marvin fan?

unplug remove cover wipe replace cover plug in

Fixya doesn't have any way to provide parts for any product. We can provide assistance to install it but the part itself. Sorry

I own a Marvin model 1220 box fan since 10 years ago. The stand broke on the hooks part. I need the buy the same, please help me on this. It is out of stock in the Internet. This fan is fantastic, but need to keep it clean so the blades don't slow down do to dust

mcdevito75 here, hello ken, I did a fast search and I think www. shop.com can help you out with Marvin air fans, I didn"t find anything on Marvin Air Fans itself. Now about the nose cone covering the nut holding the blade to the fan shaft, most of these nose covers are press fit, see if you can gently pry that nose cover off with a small screwdriver.

its extremely simple... when it does that put your hand on the oscollator cover and hold it with light pressure for a couple seconds then let go. it should work

trw www.sears.com the parts dept...have make and model ready!

It has six phillips-head screws around the perimeter. Loosen all six screws and the halves separate. Be careful loosening the screw that holds the motor in place - I ended up stripping the head. If you can use a vice grip to get it started, that may help.

their is problem in push! change your fan push! then the wings are rotate

Returned to home depot. Fan was broken.

Do they have a fan in them. If they do then the noise maybe coming from a bent fan blade. If you are mecahanically inclined then I would go into it and see. That would be the only moving part in the thing other than the tip over thing inside. I hope this helps