Question about Audio & Video Receivers
I have a DRA-685 which I have enjoyed using but now the left channel is dead. Is there something I can do to fix it or to troubleshoot it?
Any help or suggestions are greatly appreciated.
SOURCE: right channel not working
check the pre out /main in jumper there should be a loop jumper for both left and right. if you are using a graphic EQ check the wires connecting to the receiver and the EQ. also is this happening on all sources?
Posted on Feb 07, 2008
SOURCE: connecting new tv to DRA-685
you can use the headphone jack just get an adaptor to change from the headphone type to RCA type. adjust the volume of the tv to 3/4 of the way to give line level to the stereo, use an aux input on the stereo. if you had a suround sound dolby digital / DTS receiver then use the digital coax out to that type of receiver, but since you have an anolog 2 channel receiver you must use the only anolog source (the headphone).
Posted on May 21, 2008
SOURCE: MY DENON DRA-435 A RECEIVER
These recievers were infamous for the power transformers going bad(opening) if more than 2 speakers were hooked up and it was cranked up.Did it die while playing?Do you have 4 or more speakers hooked up?Was there a power surge?Let me know........
Posted on Jul 23, 2008
you have malefunction in your left output stage-but can i ask you did you forget to press left speaker button in your amp (if you have one in your amp).
Posted on Jul 27, 2008
you can use a 1/8 inch female to stereo RCA adapter and plug the patch cable into one of your inputs like DVD or CD player. The signal to noise ratio on those inputs is pretty good.
Posted on Feb 11, 2010
Tips for a great answer:
Mar 20, 2013 | Denon Dra 395 2 Channel 80watt X 2...
Dec 02, 2012 | Denon DRA-295 2 Channels Receiver
Sep 30, 2012 | Denon DRA-685 Receiver
Nov 14, 2010 | Denon DRA-685 Receiver
Feb 03, 2010 | Denon DRA-685 Receiver
May 21, 2008 | Denon DRA-685 Receiver
121 people viewed this question
Usually answered in minutes!