Question about Ovens
F1 code on kenmore elite gas stove
F-1 means the ERC is bad. sometimes turning the breaker off for a couple of min will help but if not the the clock/oven control needs to be replaced
Posted on Nov 22, 2007
Tips for a great answer:
code F1 means that an error with the keypad has occurred. Usually it happens
due to loose ribbon cable on the keypad or the electronic control assembly
itself going bad. To resolve this issue first, disconnect the power to unit and
then gain access to the back of the clock assembly (Electronic Range
Control/ERC). Now unplug the touch pad ribbon connector from the ERC, it would
be a flat wire approx. 1 1/2" to 2" wide and make sure that the cable
is not broken and nothing is shorted on the keypad. After this is done insert
the cable back and then plug the unit back to check. If the error is still
there then the electronic control board should be replaced. Hope
this helps...please post back for further assistance.
Aug 08, 2011 | Kenmore Elite Stainless Steel 40" Dual...
The "F1" fault code indicates one of the following possible failures:
Jan 21, 2011 | Kenmore 40494 / 40495 / 40499 Electric...
Jan 20, 2011 | Ovens
May 28, 2010 | Kenmore 40494 / 40495 / 40499 Electric...
Dec 11, 2009 | Kenmore 40494 / 40495 / 40499 Electric...
Aug 20, 2009 | Kenmore 41389 Electric Double Oven
Dec 16, 2008 | Ovens
Dec 15, 2008 | Kenmore 40494 / 40495 / 40499 Electric...
Jan 03, 2008 | Whirlpool 30" Self-Cleaning Freestanding...
432 people viewed this question
Usually answered in minutes!