Question about Frigidaire Affinity ATF7000E Front Load Washer

1 Answer

Frigidaire Dryer Error E 04

I have a Frigidaire Affinity Model # AEQ6000ES2 dryer that will run on a non heat setting but when started on a heat cycle begins to run and then shuts down immediately. Air flow is good, lint filters clean.
Firmware is revision r06. When prompted, the self diagnostic shows error code E04.

Anyone have any ideas?

Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem. Does anyone have an answer?

Posted on Feb 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire Affinity AEQ6700FSO electric dryer does not heat, then shuts off within 10 minutes.


Hello Scott Joseph Brandt - Since you have already replaced the thermal limiter check your breaker or fuses. Some dryers are run by two separate fuses, one for power and one for heat-ours is. If it is not the power source more than likely the issue lies with your heating coil.

Feb 05, 2013 | Frigidaire Affinity 5.8 Cu. Ft. Electric...

1 Answer

The belt is broken i have a new one i need to know how to get inside the dryer


Hi Cyndy s
Go to the following webpage and watch the video on how to dissassemble your Fridgidaire Affinity Dryer this is for the front slide replacement but you will remove the drum and you will see where the belt goes.
http://www.youtube.com/watch?v=yIPnnUqJ6Ds
For parts and a schematic of your dryer.
http://www.appliancepartspros.com/parts-for-frigidaire-aeq6000es2.html
If the belt is broken and you don't know how to route the belt check out the following picture
Please rate me
Bud
10_25_2012_9_49_26_pm.jpg

Oct 25, 2012 | Frigidaire Dryers

1 Answer

My Frigidaire Affinity dryer (mod# AEQ6000ES2) turns on but drum will only turn for a few seconds then stop. What could be the problem and can I fix this myself?


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Sep 24, 2011 | Frigidaire AEQ6000ES Electric Dryer

1 Answer

Affinity aeq6000es2. After two cycles of the


sounds like your heating element opened up,as it was running and when the element broke it arced and these were the sparks you saw,you will need a new heater element

Jul 19, 2010 | Frigidaire Dryers

3 Answers

My Frigidaire Dryer (AEQ6000ES2) won't heat. Did


I am not a repair professional. I am just a 78 year old man who has been making his own repairs for about 50 years. Therefore the dryer ID doesn't mean
anything to me. Over the years, I haven't had much trouble with my dryers. The E56 error code means high motor current. To help you find out why, I suggest you go to www.applianceaid.com where they have very good trouble shooting and repair information on dryers and other appliances. I think you'll find what you need there. You can probably verify the meaning of the error code there. Good luck with it. If I have helped you, please rate my advice on fixya.

Nov 26, 2009 | Frigidaire AEQ6000ES Electric Dryer

1 Answer

Frigidaire affinity dryer problem


the thermistor in air outlet duct is very common for these. with front panel off find plastic duct from blower at bottom. pull out thermistor and look at inner side. it has triangular shape and if you can see shiny redish color at tip instead of all black then its worn. this causes numerous heat and control issues.

Mar 29, 2009 | Frigidaire AEQ6000ES Electric Dryer

1 Answer

My Frigidaire Electric Dryer keeps giving an error code


If your dryer is the same or similar to mine (Model AEQ6000ES2) then error E68 is a stuck key on the keypad. This may be mechanically stuck or the membrane contacts. The simple solution is to replace the keypad.
I found this information by searching for "Frigidaire Model AEQ6000ES2"

Mar 23, 2009 | Frigidaire Electric Dryer

4 Answers

Frigidaire affinity dryer problem


message "ad" showing on my affinity frigidaire, anything wrong with this?

Apr 01, 2008 | Dryers

Not finding what you are looking for?
Frigidaire Affinity ATF7000E Front Load Washer Logo

528 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...