Question about Ovens

1 Answer

Gas Oven Problems

Whirlpool Gold natural gas oven heats to temperature for a time but, cools off almost enough to touch during cooking

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Gas Oven Problems - Ovens

Oven starts to heat then stops heating

Posted on Jan 09, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Ge gas oven jgbp28dej3ct.. oven pre heats good to right temp but wont maintain temp during cooking.

If your electric oven is taking too long to heat or just not heating up right,then check out this tip that will give more detail about your problem.

Oven Problems Electric Oven is Heating Slowly or Poorly


Jul 29, 2011 | GE 30 In Freestanding Gas Range ...

1 Answer

My gas oven keeps shutting off during cooking amana apartment size free standing gas oven


The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or
Oven not Heating

Oven Problems Replacing the Igniter


Jan 18, 2011 | Amana Ovens

1 Answer

Whirlpool Gas Range SF357PEKQ0 -- over heats; will not shut off; have to turn off at gas line behind stove. Error Code: F3E2. Is the replacement part I need the thermostat sensor? Is this part easy enough...

Hi lkanderson97,

This error code F3:E2 means that Oven temperature is too high (Cook mode). The only way to resolve this issue is to replace Oven temperature sensor (RTD). This part can be replaced by your husband. You may contact Sears for the replacement part at 1-800-252-1698; M-F 6:30 AM-10:30 PM - Sat 7:00 AM-9:30 PM - Sun 7:30 AM-9:30 PM - All times Central. Just get your model number ready when you call. Once you got the part instruction is also provided on how you'll replace the sensor.

Hope this helps.

Thank you for using FixYa.

Nov 22, 2010 | Whirlpool GBS277PDS Electric Single Oven

1 Answer

GE gas oven XL44 JGBP29GES1WW not enough heat

I suspect a faulty ignitor. It must draw a certain amount of amps to open the gas valve


Jun 09, 2010 | GE Ovens

3 Answers

Whirlpool Accubake oven super capacity series 465

In an attempt to self clean my oven, I pushed the auto clean button and then pressed start. Instead, nothing happened, but now have a message on the panel reading E1on the left side of panel and -F5- on the right side of panel. I am unable to clear it or operate the oven now.

Mar 16, 2008 | Whirlpool SB160PEE Gas Single Oven

2 Answers

Whirlpool gold accubake oven won't re-ignite

i have a whirlpool gas accubake range and only two burners will ignite. The other two burners make a clicking sound and release gas but never light. I have to use a match to light the other two burners and the flame is uneven on one. What should i do?

Feb 18, 2008 | Ovens

1 Answer

Oven Stops Heating

try it on broil and let me know what it does i dont think its a sensor as they check their selves and set a code most of the time

Feb 15, 2008 | Ovens

1 Answer

Oven not cooking evenly, outside is getting brown but inside is undercooked

Sounds like the igniter is not operating at full capacity. What happens is that the oven does not light when it should. Instead, the oven is cooling down much too far so when the oven does light it has too heat more rapidly. This causes the outside to brown/burn long before it should.

Jan 24, 2008 | Whirlpool SB160PEE Gas Single Oven

1 Answer

Gas oven won't heat

You most likely have a defective oven bake ignitor.  Call an experienced tecnician.

Oct 09, 2007 | Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

William Miller
William Miller

Level 3 Expert

8793 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides