Question about Kitchen Ranges
I have a kenmore gas stove model number 790.79992100 serial number VF12103410. when I have the oven on for a while (an hour or so) it starts beeping F1 or F3 and shutting off. What is the problem?
Here are the error codes for your range:
F1 Circuit board defective Replace control board F2 1. The oven temp has risen above 665F and the door is not locked or
2. The temp has risen above 965F with the door locked 1. Check oven temp in mode that failure occurred. Replace EOC (Electronic Oven Control) if above limits
2. Check 8-pin connector. Check and replace oven temperature sensor if necessary F3 Oven temperature sensor is open (above 3000 ohms) Check resistance of oven temperature sensor, check for open wiring between oven temperature sensor and control F4 Oven temperature sensor is shorted (below 500 ohms) Check resistance of oven temperature sensor, check for shorted wiring between oven temperature sensor and control F5 Internal watchdog circuit has detected a failure Defective EOC (Electronic Oven Control) F6 Shorted buttons Check push buttons and dome switches on control F8 Logic interrupted (lock motor switch sequence) Check door lock switches and wiring
Most likely problem is the oven temp. sensor. Should check around 1100 ohms at room temp. I would replace that first because it is the easiest and cheaper than an oven control.
Posted on Nov 23, 2007
I have a kenmore range that was displaying an F3 error code on the display controls, and the door was in the lock mode. When we took it apart to fix it, we found that a mouse decided to try to make a home where the lock control was in the back. The mouse had jammed the lock mechanism with insulation! Once insulation was removed, the stove worked fine!
Posted on May 04, 2008
I have a whirlpool stove n the temp works clock.n burner works but oven won't get hot coils won't turn red it won't boil clean or bake help plz
Posted on Oct 11, 2011
After cooking in the oven for about 1/2 hour the oven started beeping F-3. I have a Kenmore oven. what does that mean
Posted on Aug 03, 2010
F3 code for a kenmore electic grill range. I was coooking and now it wont
Posted on Jul 11, 2009
I HAVE A KITCHENAID GAS/CONVECTION RANGE MODEL #KGRA806PSS
ERR MESSAGE F2EO STUCK KEY
WHAT DOES THIS MEAN?
IS THERE A RESET KET?
OF A MORE SERIOUS PROBLEM?
Posted on Jan 01, 2008
Tips for a great answer:
Jan 27, 2016 | Kitchen Ranges
Jan 24, 2013 | Kitchen Ranges
Mar 03, 2010 | Tappan TGF363 Gas Kitchen Range
Nov 09, 2009 | Kitchen Ranges
Aug 24, 2009 | Kenmore 91112 / 91114 / 91117 Electric...
Mar 19, 2009 | Maytag PGR5710 Performa Gas Kitchen Range
Apr 21, 2008 | Maytag MER6772 Gemini Electric Kitchen...
Dec 05, 2007 | Kitchen Ranges
Nov 06, 2007 | Tappan TGF363 Gas Kitchen Range
2,138 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: