Question about Sony KP-41T65 41" Rear Projection Television

1 Answer

Blue Shadowing on Flat Panel 50"

Have Toshiba 50" (seven years old) that is having severe blue shadowing on every channel to point of being unwatchable; is it fixable ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 3,459 Answers

Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

This is a very common failure on these projection sets and a fairly simple DIY fix. All projeciton sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.
Here are some photos of convergence problems.

Blue Shadowing on Flat Panel 50

7859b01.jpg

Here is a quick test....

Using your original remote go-to the settings menu then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move RED and BLUE in all directions - up, down, left, and right. And you should be able to get the grid straight.

If you can't move them in all directions or cant move them far enough your convergence chips are bad and should be replaced. This is a common problem.

Note: If you TV has as flash focus or magic focus button only try pressing the button. If it fails to fix the convergence your need toBlue Shadowing on Flat Panel 50" - 69189a5.pnge below for a fix

69189a5.pngCONVERGENCE SOLUTION

You will need to replace the convergence chips and possibly some convergence resistors and pico fuses.
This is a a fairly easy DIY job if you are handy and can follow directions. You can get complete repair kits from TvRepairKits.com or click here. They have put together DIY repair kits that include the OEM parts and step by step photo instructions for each repair. If you are not handy or can't follow directions we would suggest calling a shop.

Posted on Jul 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ghosting or a 3D image. A yellow and blue ghosting or shadowing image. Looks much like the top picture in the "picture ghosting image" entry. Is this a convergence problem?


Your convergence has failed and needs to be repaired. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. You can call in a repair shop or you can get the parts and instructions from www.TvRepairKits.com and do the repair yourself. Its a fairly easy DIY fix.

Aug 09, 2011 | Toshiba 50HX70 50" Rear Projection...

1 Answer

50HP66 50 in. Plasma Television: i have red dots/shadowing on my tv...


I got the red dots really bad on my toshiba 50hp66 after an hour or two of watching tv. I found out that if you open up the tv in the back on the left you will find two adjustment pots labelled Vsc and Vy. I took a sharpie and marked where the factory defaults were first. Then I adjusted the Vy pot down a little bit and the red spots were gone! My tv looks great again!

May 16, 2010 | Toshiba 50HP66 50 in. Plasma Television

2 Answers

Blue and red overlap shadowing


convergence ic's are your culprit. they are responsible for aligning the 3 colors your tv projects onto your screen..

Mar 15, 2009 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Blue blur on part of the screen...toshiba ultra vision


Do you normally leave this set on a specific channel...such as CNBC or BLOOMBERG tv...etc that maintains a regular scrolling image???

If so...on sets that are a few/several years old...the projection tv screens can develop what's called a "burn" or "burned image" on the screen...similar to wearing a path in your carpet from heavy traffic areas. Newer models do not have this issues...but many older ones do.

Jan 11, 2009 | Hitachi 57F500 57" Rear Projection...

1 Answer

Blue ghost


I have blue ghosts/shadowing at the top of the screen.

Sep 24, 2008 | Philips 42PF7320A 42 in. Plasma HDTV

1 Answer

Red double picture with green and blue


convergence problem there are 2 integrated circuits inside the set needs to be replaced

Aug 25, 2008 | Toshiba TZ50V51 50" Rear Projection...

1 Answer

Blue Shadowing


Yes it sounds like convergence ic's
Convergence amp ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
http://www.hdtvoice.com/voice/showthread.php?t=28929
Or send to ptscorp.com
http://www.hdtvoice.com/voice/index.php?s=
good luck
please mark the post with a fixya


Feb 29, 2008 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

Toshiba 50H82 blue arcing?


color shadows on numbers or letters indicate a possible convergence problem.. might be a crt deflection problem.

Dec 18, 2007 | Toshiba 50H82 50" Rear Projection...

3 Answers

Sony KDF-E50A10 50 inch LCD


your optical block requiers replacing.not a cheap job.around £600.00

Oct 03, 2007 | Sony KDF-E50A10 50 in. LCD HDTV

Not finding what you are looking for?
Sony KP-41T65 41" Rear Projection Television Logo

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...