How to fix error E03-10 in dp8016-p - In Office Equipment & Supplies

OK. It's good.

Code Error name/description
E000 fixing overheating
E001 fixing assembly overheating
E002 fixing assembly low temperature
E003 post-standby fixing low temperature
E007 fixing film rotation error
E010 main motor rotation error
E014 fixing motor rotation error
E019 waste toner case full, waste toner case full sensor error
E020 toner clogging between sub hopper and developing assembly
E024 developing assembly connector disconnection
E025 hopper motor, bottle motor error
E032 NE controller counter error
E064 power supply voltage error (high-voltage)
E100 BD interval error
E110 scanner motor error
E191 communication error for high voltage power supply
E202 CIS home position detection error
E225 CIS light intensity error
E227 reader unit power supply error
E248 backup memory error
E261 zero-cross signal error
E315 image data error
E400 feeder communication error

You can get the drivers from this page:
http://panasonic.net/pcc/support/mfp/dp-8020/index.html
Select your operating system to download the appropriate drivers.

Coronas shorting out.Need to call a technician to fix.

It means the fuser section (the Hot Part) has g,one bad to clear the code you will need to get into the tech mode. "Function", "3", Orignal Size "Legal" that order once there go to F9 Look for Fuser Reset then turn off the machine wait 10 seconds turn on if it comes back the fuser needs replacing or worse thre main board!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

i wont driver for DP 8016p for windows7