Problem with Directed 434MHZ Remote Control
General electric Universal remote control codes12 Solutions
I have a small sylavina tv and want to use my GE universal remote but I have lost my book of codes for the remote and I don't have any paperwork for the t.v it's a small portable
23 Found Helpful
Try out this.mash and hold the set up button.when the indacator light bilnks ,press the item in which you want coded.turn that item on by hand,point to it with remote and mash the power button up to 300 times until the item turns off.then hit enter.do not go to to fast,if you over shoot the code you will have to start all over again.let me know if this works for you. halfbreed76. e-mail mckenithfamily @net zero.com
3 Found Helpful
Manually turn on the device you wish to program.
Press the Code Search button on the remote until the indicator light turns on.
Release the Code Search button.
Press and release the button for the device you are programming.
Enter the three-digit code for the device using the number buttons on the remote. After the code is
entered, the indicator light turns off.
Aim the remote at the device and press the power button. The device should turn off.
Press Channel Up on the remote with the device on. If the device responds, no further programming is required.
0 Found Helpful